Fostex Fr2 Software Update Manual
Have a look at the manual Fostex Fr2 Software Update Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 6 Fostex manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
FR-2 Software Update Procedures 1. Prepare a Compact Flash (CF) card used on FR-2. 2. Copy the software file (e.g. fr02_mv1.03) to the CF card root directory by either the following method. 1)Insert the CF card into a CF card reader / writer connected to your PC (Windows 98SE, ME, 2000 or XP) USB port. 2) Put FR-2 into the USB mode. Then, connect FR-2 to PC (Windows ME, 2000 or XP) USB port using USB cable. 3. Power OFF FR-2 (if it is powered ON). 4. Insert the CF card into the FR-2 CF card slot. 5. While pulling the REC lever to the right, power on FR-2. Until the following will appear on the LCD, keep on pulling the REC lever. The example below indicates that the current software V1.02 is going to be updated to V1.03. REC STBY REC 0 1 2346 7 8 9 10 5 ACCESS PEAK R L SHIFT/ENTER RELEASECARD MENU HOME / FILECUE PREV. NEXT CONTRASTDEL CUE LIGHT MARK CUE HOLD RESETFR-2 FIELD MEMORY RECORDER PHONES MONITOR MAX OFFSP/HP Pull the REC lever. 6. Press the MENU/ENTER knob to start updating the software. After about 20 seconds or so, “Completed!”, “4 digits checksum” and “Please wait!” messages appear on the LCD. Then, FR-2 automatically shuts off. 7. Confirm if the FR-2 software has been correctly updated to the latest one by “MENU -> SETUP -> Version” and pressing the MENU/ENTER key. 8.Power on FR-2. Initialize the SETUP settings by “MENU -> Setup -> Init Setup” and pressing the MENU/ ENTER knob (twice).