FDT Camera FD8901 User Manual

 
40 
FDT Technologies-http://www.fdt.us 
 
Here you can set an appropriate exposure mode for your camera, such as indoor, outdoor 
or let it change automatically as the change of the working environment. 
 
Here you can control the LED light status: 
Enable-Camera works at the night vision status always. 
Disable-Camera works at the day vision status always. 
Auto-Camera will change between the day and night vision status automatically according 
the change of the outside light. 
 
Note: To reset the...

 
41 
FDT Technologies-http://www.fdt.us 
 
 
6.4.2 Network 
1) Network 
Here you can set the IP address information like DHCP or Static and the port for 
HTTP/RTSP/RTMP. 
Note: Please keep the type for IP and DNS are the same, both are the DHCP or Static 
 
 
2) Wireless 
Here you can search the WIFI AP around your camera, then select and apply one of them 
to your camera. Please make sure you enable the wifi before you start to use it. 
You can also check your settings by click the “Check” button after...

 
42 
FDT Technologies-http://www.fdt.us 
 
 
Note: The FDT camera use the wired Ethernet cable by default, it will work on the 
wireless status automatically if you disconnect the Ethernet cable. But the wireless will not  

 
43 
FDT Technologies-http://www.fdt.us 
work if you still connect the Ethernet cable in your camera. 
 
3) DDNS 
Here you can set the third-party DDNS like Dyndns.org/3322.org/dynddns.us/No-ip.com 
and the status of the UPnP for your camera. You can get the public IP address of the LAN 
your camera works by click the “Query” button. 
 
 
4) ONVIF 
Here you can set the control configurations about ONVIF, such as enable status, port and 
privilege. You can configure these information as the needs of your...

 
44 
FDT Technologies-http://www.fdt.us 
 
 
2) Motion Detection(Only for IE/Firefox in windows) 
Here you can set the areas for the motion detection and the sensitivity of each area. You 
can enable or disable each of the area, or change the size of each area by dragging the 
bottom right corner of the setting window of square, or change the position by dragging 
the setting window through your mouse. 
 
 
3) Alarm link 
Here you can enable or disable the alarm actions once the alarm triggered,...

 
45 
FDT Technologies-http://www.fdt.us 
 
 
4) Schedule 
Here you can set the schedule for the motion detection alarm, red means enable and 
white means disable. You can select certain one or several days or hours you like to 
enable or disable the motion detection features. 
 
 
6.4.4 Advance 
1) User 
Here you can edit the account information of the FDT camera, such as change the 
username or password, the default account is admin/admin. 
 
 
2) Auto Snap 
Here you can set the save path and time...

 
46 
FDT Technologies-http://www.fdt.us 
 
 
3) Timed Recording 
Here you can set the configurations for timed recording, you can enable or disable it, set 
the file size for each of the video, select the stream you want to record(first or second 
stream) and the time schedule. 
 
 
4) Email 
Here you can set the sending or receiving email for your email alarm. 
Note:  
SMTP port is usually set as 25. Some SMTP servers have special port, such as 587 or 
465. 
Authentication is used for transport layer...

 
47 
FDT Technologies-http://www.fdt.us 
 
 
5) FTP 
Here you can set the FTP server configurations for your FTP storage for picture or video. 
You can click the “Test” button to check whether your settings is ok or not. Please make 
sure you have input the right folder path in your FTP server. 
 
 
6) PTZ 
Here you can set the configurations about Pan/Tilt motion for your camera. 
Cruise cycles decide the time for your vertical and horizontal cruise. 
If you enable the “Return to center preset”, it...

 
48 
FDT Technologies-http://www.fdt.us 
 
 
7) Multiple Setting(Only for IE in windows) 
Here you can search the FDT cameras in your LAN and add them into your multiple 
device group. Then you can view them at the live page together. 
 
 
 
8) Privacy Mask(Only for IE/Firefox in windows)  

 
49 
FDT Technologies-http://www.fdt.us 
Here you can set the area and color for the privacy mask of your camera, it up to 4 areas. 
You can set the color of the mask, change the size of the area by dragging the 
right-bottom corner, change the position of the area by dragging the area. 
 
 
6.4.5 System 
1) Time 
Here you can set the time and date, the status for NTP and DST, the time zone for your 
camera.