Epson Stylus Pro 9450 User Manual

Safety Instructions11
❏Place this product near a wall outlet where the plug can be 
easily unplugged.
When setting up this product
❏Do not block or cover the openings in this product’s cabinet.
❏Do not insert objects through the slots. Take care not to spill 
liquid on this product.
❏This product’s power cord is for use with this product only. 
Use with other equipment may result in fire or electric shock.
❏Connect all equipment to properly grounded power outlets. 
Avoid using outlets on the same circuit...

Safety Instructions12
❏Do not attempt to service this product yourself.
❏Unplug this product and refer servicing to qualified service 
personnel under the following conditions:
The power cord or plug is damaged; liquid has entered the 
product; the product has been dropped or the cabinet 
damaged; the product does not operate normally or exhibits 
a distinct change in performance.
❏If you plan to use the printer in Germany, observe the 
following:
To provide adequate short-circuit protection and...

Safety Instructions13
When handling the ink cartridges
❏Keep ink cartridges out of the reach of children and do not 
drink.
❏If ink gets on your skin, wash it off with soap and water. If it 
gets in your eyes, flush them immediately with water.
❏Shake the ink cartridge well before installing it for best results. 
c
Caution:
Do not shake cartridges (that have been installed previously) 
with too much force.
❏Do not use an ink cartridge beyond the date printed on the 
cartridge carton.
❏Use up the ink...

Safety Instructions14
❏After bringing an ink cartridge inside from a cold storage site, 
allow it to warm up at room temperature for at least three 
hours before using it.
❏Do not touch the green IC chip on the side of the cartridge. 
This may affect normal operation and printing.
❏In this ink cartridge, the IC chip retains a variety of cartridge 
related-information, such as the amount of ink remaining, so 
that a cartridge may be removed and reinserted freely.
❏If you remove an ink cartridge for later...

Using the Printer Software (Windows)15
Chapter 1
Using the Printer Software (Windows)
Printer Software Introduction
The printer software CD-ROM includes the following software. 
See the Unpacking and Setup Guide for installing the software, and 
see its online help for detailed information for each software.
❏Printer driver
❏EPSON Status Monitor 3
❏EPSON LFP Remote Panel
Note:
The printer driver screens that appear in this manual are provided for 
EPSON Stylus Pro 9450 running on Windows XP. The screens...

Using the Printer Software (Windows)16
❏Makes the printer settings, such as the media type, paper size. 
You can register these settings, and you can also easily import 
or export these registered settings.
❏Executes the printer maintenance functions and sets the 
operation of the printer driver in the Utility tab. You can also 
import or export printer settings.
 

Using the Printer Software (Windows)17
EPSON Status Monitor 3
This utility provides you with printer status information, such as 
the ink cartridge status, the free space of the maintenance tank, 
and it also checks for printer error. EPSON Status Monitor 3 is 
installed with the printer driver automatically.
EPSON LFP Remote Panel
EPSON LFP Remote Panel gives the user a broad range of control 
over the printer, to obtain better print quality in printing on 
various media.
 

Using the Printer Software (Windows)18
Accessing the Printer Driver
You can access the printer driver in the following ways:
❏From Windows applications
❏ From the Printer icon
From Windows applications
Access the printer driver from your application when you make 
the print settings. 
The following procedures may differ depending on the 
application you use.
1. From the File menu, select  Print or Page Setup .
2. Make sure your printer is selected, and click  Printer, Setup , 
Options , Properties , or...

Using the Printer Software (Windows)19
Example:
Example:
 

Using the Printer Software (Windows)20
The printer driver window appears.
Make the settings as necessary, and then start printing.