Epson Projector PowerLite 3700 User Manual

51
Viewing
3DImages
 You
canview 3Dimages usingyourprojector. Viewing3Dimages requires a3D-compatible video
 device,
acompatible HDMIcable, andapair ofEpson RF3Dglasses (notincluded withyour projector).
 You
canalso convert 2Dimages to3D using the2D-to-3D Conversion settinginyour projectors
 Signal
>3D Setup menu.
 You
canpurchase EpsonRF3Dglasses fromanEpson authorized reseller.Tofind thenearest reseller,
 call
800-GO-EPSON (800-463-7766).Oryou canpurchase onlineatepsonstore.com (U.S.sales) or...

52
6.
Putonthe 3Dglasses. Ifyou donot see a3D image, pairtheglasses withtheprojector.
 Note:
Ifyou change thevideo source oryou arenotwithin range ofyour projector, theglasses enter
 standby
modeandthestatus lightflashes green.Slidethepower switch onthe glasses tothe Off
 position
andthen back tothe Onposition toresume 3Dviewing.
 Pairing
the3DGlasses withtheProjector
 Charging
the3DGlasses
 3D
Viewing Range
 Parent
topic:UsingBasicProjector Features
 Related
references
 Input
Signal Settings -Signal...

53
5.
Move theglasses within10feet (3m) ofthe projector andhold down thePairing buttonforatleast
 three
seconds.
 The
status lightonthe glasses flashesgreenandred. Ifpairing issuccessful, thelight turns green
 for
10seconds andthen turns off.
 Parent
topic:Viewing 3DImages
 Charging
the3DGlasses
 When
thestatus lightonthe glasses flashesredtoindicate alow battery, itis time tocharge theglasses.
 1.
Connect thesmaller endofthe charging cabletothe port onthe bridge ofthe glasses.
 Note:...

54
•
Plug theother endofthe charging cableintoaUSB-to-AC adapterwiththefollowing
 specifications:

Input:
100-240V, ~0.15A,50-60Hz
 Output:
5V=1A
 The
glasses arefully charged whenthestatus lightonthe glasses staysgreen.
 Parent
topic:Viewing 3DImages
 3D
Viewing Range
 When
youview 3Dimages, makesureyouarepositioned withintheviewing rangeshown here.
 1
 32
ft(10 m)
 Parent
topic:Viewing 3DImages
 Selecting
theLanguage forthe Projector Menus
 If
you want toview theprojectors menusandmessages inanother...

55
1.
Turn onthe projector.
 2.
Press theMenu button.
 3.
Select theExtended menuandpress Enter.
 4.
Select theLanguage settingandpress Enter.
 5.
Select thelanguage youwant touse and press Enter.
 6.
Press Menu orEsc toexit themenus.
 Parent
topic:UsingBasicProjector Features
 Adjusting
theImage Height
 If
you areprojecting fromatable orother flatsurface, andtheimage istoo high orlow, youcanadjust
 the
image heightusingtheprojectors adjustablefeet.
 1.
Turn onthe projector anddisplay animage. 

56
2.
Ifthe image istilted, rotate thefront feettoadjust theirheight.
 3.
Use thevertical andhorizontal lensshiftdials onthe projector toadjust theposition ofthe projected
 image
asnecessary.
 If
the projected imageisunevenly rectangular, youneed toadjust theimage shape.
 Parent
topic:UsingBasicProjector Features
 Related
concepts
 Image
Shape
 Adjusting
theImage Position UsingLensShift
 If
you cannot installtheprojector directlyinfront ofthe screen, youcanadjust theposition ofthe
 projected...

57
2.
Turn thevertical andhorizontal lensshiftdials onthe projector toadjust theposition ofthe projected
 image
asnecessary.
 1
 Center
oflens
 2
 Projected
imagewhenlensshiftisset inthe center
 3
 V
×60%   

58
4
 H
×24%
 Note:
Youcannot movetheimage toboth thehorizontal andvertical maximum values.
 Parent
topic:UsingBasicProjector Features
 Image
Shape
 You
canproject anevenly rectangular imagebyplacing theprojector directlyinfront ofthe center ofthe
 screen
andkeeping itlevel. Ifyou place theprojector atan angle tothe screen, ortilted upordown, oroff
 to
the side, youmay need tocorrect theimage shape forthe best display quality.
 Correcting
ImageShape withtheKeystone Buttons
 Correcting
ImageShape...

59
1.
Turn onthe projector anddisplay animage.
 2.
Press oneofthese keystone buttonsonthe control paneltodisplay theKeystone adjustment
 screen.

PowerLite
HomeCinema 3100
 PowerLite
HomeCinema 3700     

60
3.
Press akeystone buttononthe projectors controlpaneltoadjust theimage shape.
 After
correction, yourimage isslightly smaller.
 Note:
Ifthe projector isinstalled outofreach, youcanalso correct theimage shape withtheremote
 control
usingtheKeystone settingsinthe projector menus.
 Parent
topic:Image Shape
 Related
references
 Projector
FeatureSettings -Settings Menu
 Correcting
ImageShape withQuick Corner
 You
canusetheprojectors QuickCorner settingtocorrect theshape andsize ofan image thatis...