Home > Epson > Projector > Epson Projector EMP-400W Specifications

Epson Projector EMP-400W Specifications

    Download as PDF Print this page Share this page

    Have a look at the manual Epson Projector EMP-400W Specifications online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1734 Epson manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Copyright@ Epson Australia Pty Ltd - 2008 
    Less shadow and less space. Ultra short focus projector
    PRODUCT TYPE  Entry Level Multimedia ProjectorsPRODUCT NAME EMP-400WPRODUCT CODE V11H281053PROJECTION SYSTEM  RGB Liquid Crystal Shutter Projection SystemPROJECTION METHOD  Front / Rear / Ceiling MountSPECIFICATION OF MAIN PARTS LCDSize 0.56 inches with MLA Driving method Poly-Silicon TFT Active Matrix Pixel number1,024,000 pixels (1280 x 800) x 3 Native resolution WXGA Aspect ratio 16:10 (which covers 16:9 and 4:3) Pixel arrangement Stripe Refresh Rate 50Hz-60HzPROJECTION LENSType Digital zoom / Manual focus F-number1.8 Focal length 6.48mm Zoom ratio 1.0 - 1.35 (Digital)LAMPType 170W UHE E-TORL Life
    4000Hr ( Low Brightness )#3000Hr ( High 
    Brightness )#OPTICAL SYSTEM Dichroic Mirror Separation & Prism combine methodSCREEN SIZE (PROJECTED 
    DISTANCE)  50 to 110 inch [0.54 to 1.22 m]
    BRIGHTNESS 
     High Brightness 
    Mode1800 ANSI lumens 
    (Colour mode: Game)
     Low Brightness 
    Mode1420 ANSI lumens 
    (Colour mode: Game)
    CONTRAST 500:1BRIGHTNESS UNIFORMITY  85% (Typ.)COLOUR REPRODUCTIVITY  Full colour (16.77 million colours)VIDEO QUALITY Simple Interlace - Progressive conversionSOUND OUTPUT  10W monauralEFFECTIVE SCANNING FREQUENCY RANGE (ANALOG) PIXEL CLOCK13.5MHz to 162MHz up to UXGA 60HzHORIZONTAL15KHz to 92KHzVERTICAL50Hz to 85HzADJUSTMENT FUNCTION  PROJECTOR / REMOTE 
    CONTROLBrightness / Contrast / Tint / Saturation / Sharpness / Input 
    Signal 
    Colour Temperature / Tracking / Position / Sharpness / 
    Volume etc... /
    FOOT ADJUSTERFront-centreTILT ANGLE0 to 13 degreesKEYSTONE CORRECTIONVertical: +/- 15 degreesPASSWORD PROTECTED 
    FUNCTION (security function)Implemented
    ANALOGUE RGB I/O DISPLAY PERFORMANCENative 1280 x 800 pixelsINPUT SIGNALSignal type Separate signal Video signalAnalogue (0.7V p-p, 75ohm / Mac 
    0.714Vp-p, 75ohm)
     Sync. signal Separate (positive & negative, bi-polarity 
    2-5 Vpp) / Composite (positive & 
    negative, bi-polarity 2-5Vpp) / Sync-on-
    green (negative, 0.3Vpp)
     Audio signal 500mVrms / 47k-ohmINPUT TERMINALVideo D-sub 15pin x 1 Blue moulding Audio Stereo mini jack x 2OUTPUT SIGNALVideoAnalog (0.7Vpp, 75ohm / Mac 0.714Vpp, 
    75ohm) Sync. Separate (positive & negative,TTL) / 
    Composite (positive & negative,TTL) / 
    Sync. on green (negative 0.2 - 0.4Vpp)
    OUTPUT TERMINALVideo D-sub 15pin x 1 (Black moulding)
    VIDEO I/O DISPLAY PERFORMANCE  NTSC: 560 line PAL: 560 lines (Depends on 
    observation of the multi burst pattern)INPUT SIGNALVideo standard NTSC / NTSC4.43 / PAL / M-PAL / N-PAL / 
    PAL60 / SECAM
    Video signal Composite Video (1.0Vpp / Sync. negative, 
    75ohm) / 
    S-Video (Luminous 0.714Vpp, Chrominous 
    0.286Vpp, 75ohm) / 
    Component Video (Analog Y level 0.75V 
    75ohm / Cr Cb level 
    +/-0.35V 75ohm / sync. negative 0.3V or 3-
    state+/-0.3V on Y) / 
    Video-RGB (0.7Vpp, 75ohm / Mac 0.714Vpp, 
    75ohm
    Audio signal 500mVrms / 47k-ohmINPUT TERMINALVideo Composite Video: RCA (Yellow) x1 
    S-Video: Mini DIN 
    Component Video: D-sub 15pin Blue moldin
    gAudio RCA x 1 (White/Red )CONTROL I/OSERIAL I/OTerminal D Sub 9 pin x 1 Signal RS-232C
     Network Interface RJ45 x 1EASYMPFUNCTIONESC/VP.net
    E-mail notification
    SNMP
    Web control
    PJ-Link
    AMX Device Discovery compatibleSOFTWAREEMP Monitor (for Windows) OPERATING 
    TEMPERATURE 5°C to 35°C (41°F to 95°F) > (20%-80% Humidity )
    COOL-DOWN PERIOD Instant OffSTART-UP PERIODApprox. 5 seconds (warm up 30 seconds)DIRECT POWER ONYesDIRECT POWER OFFYesPOWER SUPPLY VOLTAGE 100-240V AC±10% 50/60Hz 
    POWER CONSUMPTION100-240VAC 2.7-1.1A 50/60Hz Lamp 
    251W/236W (Lamp on) 4.2W/5.5W (standby, network off)
    EXHAUST DIRECTIONSideDIMENSIONEXCLUDE FEET258(D) x 327(W) x 95(H) mmMAXIMUM DIMENSION272(D) x 327(W) x 157(H) mmWEIGHTApprox. 3.6kgFAN NOISE HIGH BRIGHTNESS MODE35dBLOW BRIGHTNESS MODE28dBWARRANTY STANDARD WARRANTY3 years* 
    *excluding lamp
    * For more information visit Epson Projector Warranty WebsiteACCESSORIESPOWER CORD3mCOMPUTER CABLE1.8m, D-sub 15pin (Male) - Mini D-sub 15pin(Male)REMOTE CONTROLIncludedPASSWORD PROTECT 
    STICKERIncluded
    Epson PROJECTOR 
    SOFTWARECD-ROM
    OWNERS MANUALCD-ROMPRODUCT OPTIONS Item Code Description V13H010L42 Lamp
    7012083 Ceiling mount with telescopic pole
     7012084 Ceiling mount standard
    #Subject to operation and environmental conditions.
    Usage Conditions Epson products are designed and made to give highly reliable use and long life when used according to its specifications. With any system, product or device used in situations where 
    human life may be involved or at risk, Epson advises that you should take all necessary steps to ensure the suitability of your Epson product for inclusion in your system, and 
    recommends that you include fail-safe procedures and redundancy support or backup equipment in your system, to maintain the maximum safety margin and optimum system reliability. 
    Examples include but are not limited to – do not interfere with any electrical components within the device, do not use items supplied with the product for purposes other than as intended 
    by Epson (ie mains cords, inks, CDs, plastic wrapping) and do not make modifications to the product. 
    						
    All Epson manuals Comments (0)

    Related Manuals for Epson Projector EMP-400W Specifications