Epson M200 Owners Manual

•
Do not putopened inkbottles inthe box with product.
 Before
usingtheproduct:
 •
Be sure toremove thetape from theprint head.
 •
Be sure toset the transportation locktothe unlocked (printing)position: .
 If
print quality hasdeclined whenyouprint again, cleanandalign theprint head.
 Parent
topic:Cleaning andTransporting YourProduct
 Related
concepts
 Print
Head Cleaning
 Print
Head Alignment
 141  

Solving
Problems
 Check
thesesections forsolutions toproblems youmay have using yourproduct.
 Checking
forSoftware Updates
 Product
StatusMessages
 Running
aProduct Check
 Resetting
ControlPanelDefaults
 Solving
SetupProblems
 Solving
Network Problems
 Solving
Copying Problems
 Solving
PaperProblems
 Solving
Problems PrintingfromaComputer
 Solving
PageLayout andContent Problems
 Solving
PrintQuality Problems
 Solving
Scanning Problems
 Solving
Scanned ImageQuality Problems
 When
toUninstall YourProduct...

Parent
topic:Solving Problems
 Product
StatusMessages
 You
canoften diagnose problems withyour product bychecking themessages onitsLCD screen.
 LCD
screen message
 Condition/solution

Paper
jam
 Paper
isjammed inthe product. Remove thejammed paperandpress the
 OK
button toclear theerror.
 Paper
jaminthe ADF
 Paper
isjammed inthe ADF oran object isblocking thehole inthe front left
 corner
ofthe product nexttothe scanner glass.Remove theobject or
 jammed
paperandfollow theprompts onthe LCD screen toclear...

Running
aProduct Check
 Running
aproduct checkhelpsyoudetermine ifyour product isoperating properly.
 1.
Disconnect anyinterface cablesconnected toyour product.
 2.
Load afew sheets ofplain paper inthe product.
 3.
Press the Ajustes button.
 4.
Press theupordown arrow buttons toselect Maintenance andpress theOK button.
 You
seethisscreen:
 5.
Press theupordown arrow buttons toselect Nozzle Checkandpress the Iniciar button.
 After
thenozzle pattern prints,youseethisscreen:
 6.
Dothe following, depending...

Print
Head Alignment
 When
toUninstall YourProduct Software
 Related
references
 Where
toGet Help
 Resetting
ControlPanelDefaults
 If
you have aproblem withsettings onthe product controlpanel,youcanreset themtotheir factory
 defaults.
Youcanchoose whichsettings toreset orreset themall.
 1.
Press the Ajustes button.
 2.
Press theupordown arrow buttons toselect Restore DefaultSettings andpress theOK button.
 You
seeascreen likethis (M205 screen shown):
 3.
Press theupordown arrow buttons toselect...

Noise
AfterFilling theInk
 If
you hear noises fromyourproduct afterfilling theinktank withink,check theseexplanations:
 •
The firsttime youfillthe tank withink,theproduct mustcharge itsprint head. Waituntilcharging
 finishes
beforeyouturn offthe product, oritmay charge improperly anduseexcess inkthe next time
 you
turn iton. Your product isfinished charging theprint head when the power lightstops flashing.
 •
Ifthe products printhead stops moving ormaking noise,andthecharging processhasnotfinished,...

Note:
Breakdown orrepair ofthis product maycause lossofnetwork dataandsettings. Epsonisnot
 responsible
forbacking uporrecovering dataandsettings duringorafter thewarranty period.We
 recommend
thatyoumake yourownbackup orprint outyour network dataandsettings.
 Product
CannotConnect toaWireless RouterorAccess Point
 Network
Software CannotFindProduct onaNetwork
 Product
DoesNotAppear inOS XPrinter Window
 Cannot
PrintOver aNetwork
 Cannot
ScanOveraNetwork
 Printing
aNetwork StatusSheet
 Parent...

Network
Software CannotFindProduct onaNetwork
 If
EpsonNet Setupcannot findyour product onanetwork, trythese solutions:
 •
Make sureyourproduct isturned onand connected toyour network. Verifyconnection usingyour
 product
controlpanel.
 •
Check ifyour network name(SSID) contains non-ASCII characters. Yourproduct cannotdisplay non-
 ASCII
characters.
 •
Ifnecessary, reinstallyourproduct software andtryrunning EpsonNet Setupagain:
 1.
Reset yourproducts networksettingstotheir factory defaults.
 2.
Windows...

•
Make sureyouinstall yourproducts networksoftware asdescribed inyour product documentation.
 •
Print anetwork statussheetandverify thatthenetwork settingsarecorrect. Ifthe network statusis
 Disconnected
,check anycable connections andturn your product offand then onagain.
 •
Ifyou areusing TCP/IP, makesuretheproducts IPaddress isset correctly foryour network. Ifyour
 network
doesnotassign IPaddresses usingDHCP, setthe IPaddress manually.
 •
Make sureyourcomputer andproduct areboth using thesame...

•
Ifyou arescanning alarge original atahigh resolution, anetwork communication errormayoccur. Try
 scanning
againatalower resolution.
 •
Ifnetwork communication wasinterrupted whilestarting EpsonScan,exitEpson Scan,waitafew
 seconds,
andrestart it.IfEpson Scancannot restart, turnoffyour product, turnitback on,and try
 restarting
EpsonScanagain.
 •
Check theconnection settingandtesttheconnection usingEpson ScanSettings:
 Windows
8.x:Navigate tothe Apps screen andselect EPSON ScanSettings .Make surethe...