Epson EPL N2550DTT User Manual

							Replacing Consumable Products221
9
9
9
9
9
9
9
9
9
9
9
9
6. Make sure that the two levers at either side of the fuser unit 
are moved up.
7. Close cover B.
8. Reconnect the interface cable and power cord, and then turn 
on the printer.
 
						

							222Replacing Consumable Products 9. When the printer’s Ready light is on, press the Enter 
button to access the control panel menus.
10. Press the uUp or dDown button several times until 
Reset Menu appears on the control panel, and then press the 
Enter button.
11. Press the dDown button to display Reset Fuser Counter, 
and then press the Enter button.
 
						

							Cleaning and Transporting the Printer223
10
10
10
10
10
10
10
10
10
10
10
10
Chapter 10 
Cleaning and Transporting the Printer
Cleaning the Printer
The printer needs only minimal cleaning. If the printer’s outer 
case is dirty or dusty, turn off the printer and clean it with a soft, 
clean cloth moistened with a mild detergent.
c
Caution:
Never use alcohol or paint thinner to clean the printer cover; these 
chemicals can damage the components and the case. Be careful 
not to get water onto the printer mechanism or any electrical 
components.
Cleaning the pickup roller
If the paper jam occurs frequently, wipe the pickup roller with a 
clean dampened cloth. Follow the steps below.
 
						

							224Cleaning and Transporting the Printer 1. Turn the printer off and open Cover A slowly.
2. Hold the handle of the imaging cartridge and pull out.
Note:
Place the cartridge on a clean, flat surface.
 
						

							Cleaning and Transporting the Printer225
10
10
10
10
10
10
10
10
10
10
10
10
3. Remove the two pick up rollers by bending their tabs slightly 
outwards while sliding them off the spindles.
4. With a clean damp cloth, wipe the pickup roller’s rubber 
parts.
* rubber parts
 
						

							226Cleaning and Transporting the Printer 5. Reattach the pickup rollers as shown below. Then, fit the hook 
in the concave part of the shafts to fix them.
Note:
Fit the convex parts of the pickup rollers in the concave parts of the 
shaft.
6. Reinstall the imaging cartridge.
 
						

							Cleaning and Transporting the Printer227
10
10
10
10
10
10
10
10
10
10
10
10
7. Close Cover A until it clicks shut.
Transporting the Printer
For long distances
If you need to transport your printer for long distances, carefully 
repack it using the original box and packing materials.
Follow these steps to repack your printer.
1. Turn off the printer.
2. Remove the following items:
❏Imaging cartridge
❏Power cord
❏Interface cables
❏Loaded paper
3. Remove all installed options. For information on removing 
options, see the section under Installing Options.
4. Attach the protective materials onto the printer, then repack 
the printer in its original box.
For short distances
Always pay attention to the following handling precautions when 
you need to move the printer for a short distance:
 
						

							228Cleaning and Transporting the Printer ❏If you are moving the printer on its own, two people should 
lift and carry the printer.
Moving the printer
Follow these steps to move the printer for a short distance. 
1. Turn off the printer and remove the following items: 
❏Power cord
❏Interface cable
2. Be sure to lift the printer by the correct positions as shown 
below.
3. When moving the printer, always keep it horizontal.
Moving the printer together with an optional lower paper 
cassette installed
Follow these steps to move the printer together with the optional 
550-Sheet Universal Paper Cassette Unit:
1. Turn off the printer and remove the following items. 
 
						

							Cleaning and Transporting the Printer229
10
10
10
10
10
10
10
10
10
10
10
10
❏Power cord
❏Interface cable
2. Lift the printer together with the optional unit.
c
Caution:
Do not move the printer on angled or uneven surfaces.
Finding a place for the printer
When relocating the printer, always choose a location that has 
adequate space for easy operation and maintenance. Use the 
following illustration as a guide for the amount of space required 
around the printer to ensure smooth operation. Dimensions 
shown in the illustrations below are in millimeters.
To install and use any of the following options, you will need the 
indicated amount of additional space.
 
						

							230Cleaning and Transporting the PrinterThe 550-Sheet Universal Paper Cassette Unit adds 95 mm (3.7 
in.) to the bottom of the printer. When two optional paper 
cassette units are installed, the printer requires 190 mm (7.4 
in.) more space beneath the printer.
The Duplex Unit adds 68.5 mm (2.7 in.) to the back of the 
printer.
In addition to space consideration, always heed the following 
precautions when finding a place to locate the printer:
❏Place the printer where you can easily unplug the power cord.
❏Keep the entire computer and printer system away from 
potential sources of interference, such as loudspeakers or the 
base units of cordless telephones.
❏Avoid using an electrical outlet that is controlled by wall 
switches or automatic timers. Accidental disruption of power 
can erase valuable information in your computer’s and 
printer’s memory.
c
Caution:
❏Leave adequate room around the printer to allow for sufficient 
ventilation.
❏Avoid locations that are subject to direct sunlight, excessive 
heat, moisture, or dust.
❏Avoid using outlets that other appliances are plugged into.
❏Use a grounded outlet that matches the printer’s power plug. 
Do not use an adapter plug.
❏Only use an outlet that meets the power requirements for this 
printer.