Eiki Projector Lc Wb42na User Manual
Have a look at the manual Eiki Projector Lc Wb42na User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 422 Eiki manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 76
76
Appendix
Compatible Computer Specifications
Basically this projector can accept the signal from all computers with t\
he V-, H-Frequency mentioned below
and less than 140 MHz of Dot Clock for analog signal and 110 MHz of Dot Clock for digital signal.
When selecting these modes, PC adjustment can be limited.
ON-SCREEN DISPLAYRESOLUTIONH-Freq.(KHz)V-Freq.(Hz)
VGA 1640 x 48031.4759.88
VGA 2720 x 40031.4770.09
VGA 3640 x 40031.4770.09
VGA 4640 x 48037.8674.38
VGA 5640 x 48037.8672.81
VGA 6640 x...](http://img.usermanuals.tech/thumb/1702/89022/w64_eiki-lc-wb42na-manual_d-75.png "Page 76
76
Appendix
Compatible Computer Specifications
Basically this projector can accept the signal from all computers with t\
he V-, H-Frequency mentioned below
and less than 140 MHz of Dot Clock for analog signal and 110 MHz of Dot Clock for digital signal.
When selecting these modes, PC adjustment can be limited.
ON-SCREEN DISPLAYRESOLUTIONH-Freq.(KHz)V-Freq.(Hz)
VGA 1640 x 48031.4759.88
VGA 2720 x 40031.4770.09
VGA 3640 x 40031.4770.09
VGA 4640 x 48037.8674.38
VGA 5640 x 48037.8672.81
VGA 6640 x...")
81 This projector is compliant with PJLink Standard Class 1 of JBMIA (Japan Business Machine and Information System Industries Association). This projector supports all commands defined by PJLink Class 1 and is verified conformance with PJLink Standard Class 1. For PJ Link password, see page 51 on the owner’s manual of “Network Set-up and Operation.” Projector Input RGB Computer 2 (Analog) Component RGB (Scart) PJLink Input RGB 2 RGB 1 DIGITAL 1 RGB 3 RGB 4 Video S-video VIDEO 2 VIDEO 3 NETWORK 1NETWORK Computer 1 Video PJLink is a registered trademark of JBMIA and pending trademark in some countries. Pj Link Notice Parameter 12 11 31 13 14 22 23 51 Appendix HDMI(Digital)
82 Vcc - Data + Data Ground 1 2 3 4 2 3 4 1 COMPUTER IN 1 /COMPONENT IN /MONITOR OUT (ANALOG) Terminal: Analog RGB (Mini D-sub 15 pin) 512341096781514131112 Configurations of Terminals Red (R/Cr) Input/Output Ground (Horiz.sync.) Green (G/Y) Input/Output ----- Blue (B/Cb) Input/Output Ground (Red) Ground (Green) Ground (Blue) 1 5 2 4 3 6 7 8 +5V Power/----- Horiz. sync. Input/Output (Composite H/V sync.) Ground (Vert.sync.) DDC Data/----- Ground/----- Vert. sync. DDC Clock/----- 9 13 10 12 11 14 15 RX – TX + TX – RX + 2 3 4 8 7 6 5 4 3 2 1 5 6 7 8 1 USB CONNECTOR (Series B) LAN TERMINAL ----- ----- ---------- Appendix 13579111315171918161412108642 TMDS Data 2+ Input Ground (TMDS Data 1) Ground (TMDS Data 2) TMDS Data 1+ Input TMDS Data 2- Input TMDS Data1- Input TMDS Data 0+ Input Ground (TMDS Data 0) 1 5 2 4 3 6 7 8 Ground (TMDS Clock) SCL TMDS Clock- Input ----- ----- SDA Ground (DDC/CEC) 11 15 12 14 13 16 17 TMDS Data 0- Input TMDS Clock+ Input 9 10 Plug insert detection19 18+5VPower HDMI (19 Pin Type A)
83 Appendix Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost the number and unable to operate the projector, contact the service station. PIN Code Number Memo Factory default set No: 1 2 3 4* Factory default set No: 4 3 2 1* Put the label below (supplied) on in a prominent place of the projector's body while it is locked with a PIN code. While the projector is locked with the PIN code. PIN Code Lock No . Logo PIN Code Lock No . *Should the four-digit number be changed, the factory set number will be invalid. → Hook and loop fastener (supplied) USB Thumb Drive Case While the USB thumb drive is not in use, put it in the USB Thumb Drive Case to prevent lose USB theumb drive. Use hook and loop fastener, the USB Thumb Drive Case will be a fixed place on the projector. USB thumb drive case (supplied)
84 Appendix Dimensions Screw Holes for Ceiling MountScrew: M4Depth: 12.0(0.472) 10.30 (261.5) 13.16(334.2) 2.12(53.8) 3.17(80.5) 3.09(78.4 ) 3.66(93.0 ) 5.08(129.0)5.20(132.0) 2.78(70.5) 5.08(129.0) 5.51(140.0) 4.43(112.5) Unit: inch (mm)
KY7BE U.S.A. EIKI International, Inc. 30251 Esperanza Rancho Santa Margarita CA 92688-2132 U.S.A. Tel : 800-242-3454 (949)-457-0200 Fax : 800-457-3454 (949)-457-7878 E-Mail : [email protected] Deutschland & Österreich EIKI Deutschland GmbH Am Frauwald 12 65510 Idstein Deutschland Tel : 06126-9371-0 Fax : 06126-9371-14 E-Mail : [email protected] China EIKI (Shanghai) Co., Ltd. Lakeside Oasis Middle Ring Business Centre Block 10. #16-07, 1628, Jin Sha Jiang Road, Shanghai, 200333. China Main Line : 86-21-3251-3993 Service Hot Line : 86-21-3251-3995 Fax : 86-21-3251-3997 E-mail : [email protected] Canada EIKI CANADA - Eiki International, Inc. P.O. Box 156, 310 First St. - Unit 2, Midland, ON, L4R 4K8, Canada Tel : 800-563-3454 (705)-527-4084 Fax : 800-567-4069 (705)-527-4087 E-Mail : [email protected] Eastern Europe EIKI CZECH SPOL. s.r.o. Nad Cementárnou 1163/4a Praha 4, Podolí 147 00 Czech Republic Tel : +420 241 410 928 +420 241 403 095 Fax: +420 241 409 435 E-Mail : [email protected] South East Asia EIKI Industrial (M) Sdn Bhd No. 3A-2C, 4th Floor, Jalan PJU 8/3A, Perdana Business Centre, Bandar Damansara Perdana, 47820 Petaling Jaya, Selangor Malaysia Tel : +603-7722-4362 Fax : +603-7722-4392 E-Mail : [email protected] Japan & Worldwide EIKI Industrial Company Limited. 4-12 Banzai-Cho, Kita-Ku, Osaka, 530-0028 Japan Tel : +81-6-6311-9479 Fax : +81-6-6311-8486 WorldWide Website http://www.eiki.com ©2009 Eiki International, Inc.