Eiki Projector Lc Hdt2000 User Manual

81

 
appears on the screen
–  
The  end  of  lamp  life  is  approaching.  Replace  the  lamp  with  a  new  one  after  it  has 
cooled down. (See page 76)
　　　　   or
appears on the screen
–  The  remaining  time  exceeded  the  specified  time  or  reached  0%.  In  the  latter  case, 
replace the filter with a new one promptly. (See pages 73, 74)
The image is out of focus.
– Adjust the focus of the projector.
– Check Projection Lens to see if it needs cleaning.
 ✔Note:   Moving  the  projector  from...

82

WARNING: 
High voltages are used to operate this projector. Do not attempt to open the cabinet.
If problems still persist after following all operating instructions, contact the dealer where you purchased the projector 
or  the  service  center.  Specify  the  model  number  and  explain  about  the  problem. We  will  advise  you  how  to  obtain 
service.
Appendix
The shutter does not 
work.– Check “Protection” or “Release Key” of the shutter function. (See page 66)
The power is turned off...

8

Menu Tree
InputRGB (PC analog)RGB (Scart)RGB (PC digital)RGB (AV HDCP)
Input 3
RGB
VideoS-video
Input 2
✔Note:
•The Menu display varies depending on the input signal.
Appendix
Input 4
(For Optional Interface Boards)
(For Optional Interface Boards)
HDMI
Computer Input/HDMI Input/Video Input
Input 1
Projector
Information
Remote control
EffectRelease key
InputH-sync freq.V-sync freq.
Key lock
Screen
Language
Lamp mode
Power management
PIN code lock
Lamp controlLamp interval
Filter counter
Remote...

84

HDMI Input/Video Input
0–630–63
0-15
Image adjustContrastBrightness
RedGreenBlue
Sharpness
Noise reductionProgressive
Gamma
0–630–630–63
0–31 
Off/On/FilmOff/ On
Color management
Auto picture controlOff/L1/L2
Color temp.Color temp.
OffsetRed/Green/Blue
COLORGAMMA
COLOR M.MENUMidLowCOLOR M.
ALL DELMENU
Advanced colorAuto/Off
LIST
HighMidLowHighAdj.
XLowLowMid
ResetStoreImage 1 - Image 10
Yes / No
Video Input
System (2)Auto
PAL
SECAM
NTSC
NTSC 4.43
PAL-M
PAL-N
System ()Auto
1080i
1035i
720p
575p...

85

Appendix
Fan control
1–30 Min.
Position
12 languages
Background
Display
Lamp mode4-Lamps
Edge blendingOn/Off
All
On/Off
Black level
Test pattern
Reset
Lamp interval
Menu off
Remote controlRC sensor
Power management
Setting
Menu sizeNormalDoubleOnCountdown OffOffBlueUserBlack
TargetCurrentConstant mode
AutoNormal
Eco1Eco2
Lamp controlLamp control
Lamp life controlMode1
OffMode 2
Picture in PicturePicture in Picture
Language
Menu
Off/User 1 - User 5
ModeP in P/P by P
24H/200H/500H/1000H/2000H...

86

Appendix
Indicators and Projector Condition
Check the indicators for the projector condition.
The projector is operating normally.
Indicators
Projector ConditionPOWER
green
LAMP
red
WARNINGTEMP.
red
WARNINGFILTER
orange
SHUTTER
blue
LAMPREP. 
orange
The projector is off. (The main On/Off switch is OFF 
position or the AC power cord is unplugged.)
The projector is in stand-by mode. Press the ON/
STAND-BY button to turn on the projector.
The projector is operating normally.
(The Shutter is open)
The...

87

Appendix
The projector is detecting abnormal condition.
Indicators
Projector ConditionPOWER
green
LAMP
red
WARNINGTEMP.
red
WARNINGFILTER
orange
SHUTTER
blue
LAMPREP.
orange
The temperature inside the projector is elevated 
close to the abnormally high level.
The temperature inside the projector is abnormally 
high. The projector cannot be turned on. When 
the projector is cooled down enough and the 
temperature returns to normal, the POWER 
indicator lights green and the projector can be 
turned...

88

Appendix
The projector is detecting abnormal condition.
Indicators
Projector ConditionPOWER
green
LAMP
red
WARNINGTEMP.
red
WARNINGFILTER
orange
SHUTTER
blue
LAMPREP.
orange
If the Filter counter reached a time set in the timer 
setting, the icon as shown in Fig.1 appears on the 
screen and the WARNING FILTER indicator on the 
top panel lights up. Replace the filter as soon as 
possible. If the projector reaches a time set in the 
timer setting, the icon shown in Fig. 2 appears on 
the screen and...

89

Appendix
Compatible Computer Specifications
Basically this projector can accept the signal from all computers with the V- and H-Frequency mentioned below 
and less than 230 MHz of Dot Clock.
✽
✔Note:
• Alphabet letter "i" placed beside some of the resolutions represents interlace signa\
l.
       “True” cannot be selected.
✽
ON-SCREEN DISPLA yRESOLUTIONH-Freq. 
(kHz)
V-Freq. 
(Hz)
VGA 1640x48031.470 59.880 
VGA 2720x40031.470 70.090 
VGA 3640x40031.470 70.090 
VGA 4640x48037.860 74.380 
VGA...

90

When an input signal is digital from the HDMI or DVI-D terminal, refer to the chart below.
ON-SCREEN DISPLA yRESOLUTIONH-Freq. 
(kHz)
V-Freq. 
(Hz)
D -VGA640x48031.470 59.940 
D - 480i720x480 i15.73460.000
D - 575i720x576 i15.62550.000 
D - 480p720x48031.470 60.000 
D - 575p720x57531.250 50.000 
D -SVGA800x60037.879 60.320 
D -XGA1024x7684 3.363 60.000 
D -W XGA 11366x76848.360 60.000 
D -W XGA 21360x76847.700 60.000 
D -W XGA 31376x76848.360 60.000 
D -W XGA 41360x76856.160 72.000 
D -W XGA...