Eiki Projector EK-600U User Manual
Here you can view all the pages of manual Eiki Projector EK-600U User Manual. The Eiki manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 51
— 37 — DLP Projector — Owner’s Manual Audio Settings Menu Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select SETUp and press the Enter button to enter the SETUp menu. Press the arrow keys (pq) to select Audio Settings and press the Enter button to enter the Audio Settings menu. Press the arrow keys (pq) to select the menu option and press the Enter button to enter its submenu. Press the arrow keys (pqtu ) to select or adjust the desired settings and press the Enter...
Page 52
— 38 — DLP Projector — Owner’s Manual Advanced Menu Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select SETUp and press the Enter button to enter the SETUp menu. Press the arrow keys (pq) to select Advanced and press the Enter button to enter the Advanced menu. Press the arrow keys (pq) to select the menu option and press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or adjust the desired settings and press the Enter button to confirm....
Page 53
— 39 — DLP Projector — Owner’s Manual ItemDescrIptIon EthernetEnable or disable the Ethernet feature. RS232 Enable or disable the RS232 feature. HDBaseT Mode Set the HDBaseT mode setting: • Auto: The projector will automatically switch to the HDBaseT mode when it detects a signal from the HDBaseT port. • HDBaseT: The projector is switched to the HDBaseT mode. Communications Menu Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select SETUp and press the Enter button to enter...
Page 54
— 40 — DLP Projector — Owner’s Manual Options Menu Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select OpTIOnS and press the Enter button to enter the OpTIOnS menu. Press the arrow keys (pq) to select the menu option and press the Enter button to enter its submenu. Press the arrow keys (pqtu ) to select or adjust the desired settings and press the Enter button to confirm. OPTIONS Input Source Off Source Lock High Altitude Information Hide Keypad Lock Display Mode Lock...
Page 55
— 41 — DLP Projector — Owner’s Manual ItemDescrIptIon 12V Trigger• On: Choose “On” to enable the trigger. • Off: Choose “Off” to disable the trigger. Reserved IR_IN & detect GND Beep • Off: No beep sound is audible when a key is pressed or in an error event. • On: Beep sound is audible when a key is pressed or in an error event. Advanced Configure the advanced settings. See “Advanced Menu” on page 42. Lamp Settings Configure the lamp settings. See “Lamp Settings Menu” on page 43. Optional Filter...
Page 56
![Page 56
— 42 —
DLP Projector — Owner’s Manual
ItemDescrIptIon
User 2The default value is “Zoom”.
• Press u into the next menu and then use t or u to select “HDMI2”,
“DP”, “VGA2”, “S-Video”, “Test Pattern”, “Zoom”, or “Info.”, “HDBaseT“
item.
User 2
Zoom
IR Function • All: Choose “All”, the projector can be operated by the remote con\
trol
from front or top IR receiver.
• Front: Choose “Front”, the projector can be operated by the remote\
control from front IR receiver.
• Top: Choose “Top”, the projector...](http://img.usermanuals.tech/thumb/1702/100508/w300_projector_manual_9534_d-55.png "Page 56
— 42 —
DLP Projector — Owner’s Manual
ItemDescrIptIon
User 2The default value is “Zoom”.
• Press u into the next menu and then use t or u to select “HDMI2”,
“DP”, “VGA2”, “S-Video”, “Test Pattern”, “Zoom”, or “Info.”, “HDBaseT“
item.
User 2
Zoom
IR Function • All: Choose “All”, the projector can be operated by the remote con\
trol
from front or top IR receiver.
• Front: Choose “Front”, the projector can be operated by the remote\
control from front IR receiver.
• Top: Choose “Top”, the projector...")
— 42 — DLP Projector — Owner’s Manual ItemDescrIptIon User 2The default value is “Zoom”. • Press u into the next menu and then use t or u to select “HDMI2”, “DP”, “VGA2”, “S-Video”, “Test Pattern”, “Zoom”, or “Info.”, “HDBaseT“ item. User 2 Zoom IR Function • All: Choose “All”, the projector can be operated by the remote con\ trol from front or top IR receiver. • Front: Choose “Front”, the projector can be operated by the remote\ control from front IR receiver. • Top: Choose “Top”, the projector...
Page 57
![Page 57
— 43 —
DLP Projector — Owner’s Manual
ItemDescrIptIon
Sleep Timer (min)This item allows the projector to automatically power off after it has been on
for a specified amount of time.
Quick Resume • On: If the projector is accidentally turned off, this feature allows the
projector to be instantly powered on again, if selected within a period \
of
100 seconds.
• Off: The fan will start cooling the system after 10 seconds when user
turns off the projector. Quick Resume is not supported for WUXGA...](http://img.usermanuals.tech/thumb/1702/100508/w300_projector_manual_9534_d-56.png "Page 57
— 43 —
DLP Projector — Owner’s Manual
ItemDescrIptIon
Sleep Timer (min)This item allows the projector to automatically power off after it has been on
for a specified amount of time.
Quick Resume • On: If the projector is accidentally turned off, this feature allows the
projector to be instantly powered on again, if selected within a period \
of
100 seconds.
• Off: The fan will start cooling the system after 10 seconds when user
turns off the projector. Quick Resume is not supported for WUXGA...")
— 43 — DLP Projector — Owner’s Manual ItemDescrIptIon Sleep Timer (min)This item allows the projector to automatically power off after it has been on for a specified amount of time. Quick Resume • On: If the projector is accidentally turned off, this feature allows the projector to be instantly powered on again, if selected within a period \ of 100 seconds. • Off: The fan will start cooling the system after 10 seconds when user turns off the projector. Quick Resume is not supported for WUXGA...
Page 58
— 44 — DLP Projector — Owner’s Manual Optional Filter Settings Menu Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select OpTIOnS and press the Enter button to enter the OpTIOnS menu. Press the arrow keys (pq) to select Optional Filter Settings and press the Enter button to enter the Optional Filter Settings menu. Press the arrow keys (pq) to select the menu option and press the Enter button to enter its submenu. Press the arrow keys (pqtu ) to select or adjust the...
Page 59
![Page 59
— 45 —
DLP Projector — Owner’s Manual
Control your projector Using Web browser
Ethernet
projector
Wired LAN Terminal functionalities
Remote control and monitoring of a projector from a PC (or Laptop) via\
wired LAN is also possible.
Compatibility with Crestron control boxes enables not only collective pr\
ojector management on a network
but also management from a control panel on a PC (or Laptop) browser s\
creen.
• Crestron is a registered trademark of Crestron Electronics, Inc. of the \
United...](http://img.usermanuals.tech/thumb/1702/100508/w300_projector_manual_9534_d-58.png "Page 59
— 45 —
DLP Projector — Owner’s Manual
Control your projector Using Web browser
Ethernet
projector
Wired LAN Terminal functionalities
Remote control and monitoring of a projector from a PC (or Laptop) via\
wired LAN is also possible.
Compatibility with Crestron control boxes enables not only collective pr\
ojector management on a network
but also management from a control panel on a PC (or Laptop) browser s\
creen.
• Crestron is a registered trademark of Crestron Electronics, Inc. of the \
United...")
— 45 — DLP Projector — Owner’s Manual Control your projector Using Web browser Ethernet projector Wired LAN Terminal functionalities Remote control and monitoring of a projector from a PC (or Laptop) via\ wired LAN is also possible. Compatibility with Crestron control boxes enables not only collective pr\ ojector management on a network but also management from a control panel on a PC (or Laptop) browser s\ creen. • Crestron is a registered trademark of Crestron Electronics, Inc. of the \ United...
Page 60
— 46 — DLP Projector — Owner’s Manual 2. On the PC (Laptop), select Start → Control panel → network and Internet. 3. Right-click on local Area Connection , and select properties. 4. In the properties window, select the networking tab, and select Internet protocol (TCp/Ip) .