Home > Eiki > Projector > Eiki Projector Eip Wx5000 Quickstart Guide

Eiki Projector Eip Wx5000 Quickstart Guide

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual Eiki Projector Eip Wx5000 Quickstart Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 422 Eiki manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    Add page 1 to Favourites
    image text
    Enable zoom 
    							Setup and ProjectionThis Quick Guide shows the basic operation (projector connecting with the 
computer using an RGB cable). Before using the projector, please read the 
Owner’s Manual carefully.1.
Place the projector facing a screen
2.
Connect the projector to the computer and plug the power cord 
into the AC socket of the projector
3.
Remove the lens cap and turn the projector on
EIP-WX5000/WX5000L
 Quick Guide
4.
Adjust the angle
5.
Adjust the focus and the zoom
8.
Turn the power off
7.
Select the input mode1 Press  H&V LENS SHIFT  on the projector or on the remote control.
1 Press FOCUS  +/– on the projector or on the remote control to adjust the focus. 2 Press ZOOM  +/– on the projector or on the remote control to adjust the zoom.2 Press ', " , \  or  | on the projector or the remote control.
Adjust the projector angle:Adjust the projector angle by rotating the adjustment feet.Press 
INPUT  on the projector or  COMPUTER1 on the remote control to select the “COMPUTER1” mode.•
•You can unplug the power cord even if the projector is operating.
Even if you unplug the power cord from the AC outlet, the cooling fan co\
ntinues to run for a while.
6.
Correcting the image distortion due to the projection angle1Press KEYSTONE  on the projector or on the 
remote control. 2 Press  ENTER  on the projector or on the 
remote control.3 Press  ', " , \  or  | to move the position for 
the upper left of the image. 
4 Press  ENTER  to set the position. 5 Repeat the same procedure with the positions 
for the upper right, lower right and lower left of 
the image.
5
4676764 38
Shift the lens horizontally and vertically. 
On the remote control
On the
projector
INPUT list
 On-screen Display (RGB)
Press  STANDBY-ON  on the projector or on the remote control. While the confirmation messa\
ge is 
displayed, press  STANDBY-ON again.
"
" "
"
" On-screen Displa
y
4
6
7438
56
• •
When the position of the lower left is set, the 
correction is made and the display disappears.•
When you press  INPUT on the projector, the INPUT list appears. 
Press  '/"  to switch the INPUT mode and then press  ENTER.
When using the remote control, press  COMPUTER1/2 , DVI , HDMI , VIDEO  or S-VIDEO  to switch the 
input mode.•
•
®
Press  STANDBY-ON  on the projector or on the remote 
control.
Switching the Input Mode:
Printed in China
XXXXXXXXXXXXX 08P07-CH-NM
&*1@89@-@2@+&Q 08.5.23, 18:37
Page 2 EPCF1BHF.BLFS+11$
    All Eiki manuals Comments (0)

    Related Manuals for Eiki Projector Eip Wx5000 Quickstart Guide