Creative Pfaff 3 Manual

6:5
Touch functions
Use your stylus to make changes directly on screen 
E\WRXFKLQJDQGGUDJJLQJLQWKHVWLWFKÀHOG

6:6Stitch Creator™ feature
Loading and sewing a stitch
To sew the created stitch touch OK in the top right 
corner in the Stitch Creator™ feature window. The 
stitch will be loaded to sewing mode and is ready to 
be sewn.
If selecting another stitch in sewing mode and then 
re-opening Stitch Creator
™ feature, your created 
stitch will remain unchanged. Every time Stitch 
Creator
™ feature is closed, the stitch will be loaded 
to sewing mode.
Saving a stitch
Saving a stitch is done in sewing mode. Close...

7
Embroidery mode – 
 preparations 

Embroidery Mode - Preparations7:2
A
B
B
(PEURLGHU\XQLWoverview
(type BE16)
A  Embroidery unit release button
B  Level adjusting feet
C  Embroidery unit socket
D  Embroidery hoop connection assembly
E Embroidery arm
(PEURLGHU\KRRSoverview
F  Embroidery hoop connector
G Outer hoop
H Inner hoop
I Quick release
J Retaining screw
. 5LEVIRU

Embroidery mode - preparations
7:3
Built-in designs
More than 150 designs are included in the memory 
in your machine. 
creative™ (PEURLGHU\FROOHFWLRQ
Page through the creative™ 3.0 Embroidery 
collection for all built-in designs and fonts. 
The design number, stitch count (number of stitches 
in the design) and the design size are displayed next 
to each design. The suggested thread color for each 
color number is shown.
Connect the HPEURLGHU\XQLW
There is a covered socket behind the free-arm, see...

A
B
C
Embroidery Mode - Preparations7:4
To hoop the fabric
For the best embroidery results, place a layer 
of stabilizer beneath the fabric. When hooping 
stabilizer and fabric make sure that they are smooth 
and securely hooped.
1.  Open the quick release (A) on the outer hoop. 
Remove the inner hoop. Place the outer hoop on 
DÀUPÁDWVXUIDFHZLWKWKHVFUHZRQWKHORZHU
right. There is a small arrow in the center of the 
lower edge of the hoop which will line up with 
a small arrow on the inner hoop....

Designs
Embroidery stitch-out
USB device
Start/stop
Embroidery mode
Selection menu
3HUVRQDOÀOHV
Embroidery mode - preparations
7:5
Getting started embroidering
1.  After attaching the embroidery unit and 
embroidery foot, insert a bobbin with 
lightweight bobbin thread.
Note: Make sure that the IDT
™ system is disengaged.
2.  Touch embroidery mode icon to go to 
Embroidery edit. To select a built-in design, 
open the selection menu and touch the designs 
icon. Locate desired design and touch it once to...

Color block list
A
Embroidery Mode - Preparations7:6
Note: This machine features the automatic function Cut 
jump stitches. When activated the machine trims the 
top jump stitch threads and pulls the thread ends to the 
underside of the fabric. The default setting is on. To turn 
it off, go to the Settings menu, Embroidery settings and 
deselect Cut jump stitches. Read more about Cut jump 
stitches in chapter 3.
8.  If Cut jump stitches is not activated the machine 
will stop after stitching a few...

8
Embroidery mode – 
 edit 

8:2Embroidery mode - edit
(PEURLGHU\PRGHHGLW
Touch the Embroidery mode icon to enter Embroidery edit. If you turn on the machine with the 
embroidery unit attached, Embroidery Edit will be opened automatically. In Embroidery edit you can 
adjust, combine, save and delete designs. You do not need to have the embroidery unit connected to your 
WKHHPEURLGHU\ÀHOG
(PEURLGHU\HGLWoverview
Save to 
SHUVRQDOÀOHV Touch function - Move
Zoom options/pan
Select hoop
Embroidery 
text editor
Embroidery...