Home
>
Comdial
>
Communications System
>
Comdial Dsu II Single Line Proprietary Telephone Station Users Guide
Comdial Dsu II Single Line Proprietary Telephone Station Users Guide
Here you can view all the pages of manual Comdial Dsu II Single Line Proprietary Telephone Station Users Guide. The Comdial manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 31
Troubleshooting Your Telephone Symptom Possible Cause INTERCOM light flashing Your messaging is set. Lift handset, then dial # 02 and hang up. Station is ringing with ringer off. MUTE light on MUTE is activated. To cancel, press MUTE. Error Tone (three steady tones)May occur when incorrect extension is dialed. 10 GCA70–246 Troubleshooting Your Telephone Single Line Telephone Station Users Guide 10 – 1
Page 33
Glossary A Automatic callback:System will ring a calling telephone when a busy called telephone becomes idle. Automatic set relocation:The ability of the telephone system to relocate your extension number and restore all previous settings after a physical move has occurred. B Busy Lamp Field (BLF):Rows of lights on a telephone that shows which extensions on the system are busy and which ones are not. C Call forwarding:Designating another telephone to receive intercom calls normally directed to the user’s...
Page 34
H Hookflash:Action that occurs when the TAP button is pressed. Needed for activating host system features. Hookswitch:The switch on a telephone which, when depressed manually or by the handset, disconnects a call. I Idle line preference:A system configuration that allows a telephone to select the first free line when the handset is lifted. K Keypad:Buttons 0 through 9,Sand # used for dialing. L LCD Messages:System-supplied messages that you can select to be sent to a caller’s display (LCD) when you...
Page 35
Q Queuing:The ability of a telephone system to hold calls when all lines are busy until a line becomes available. R Recall/flash feature:Provides a fresh dial tone. This can be accomplished by either pressing a special recall feature button or by using a flash which is a signal generated when you depress and then quickly release the hookswitch. Response messaging:Responding non-verbally to a calling station by pressing a programmed button that sends a message to the calling station’s display. Ringing...
Page 36
Z Zone paging:Paging through the intercoms of some stations or departments in the system. Glossary GCA70–246 G–4 Single Line Station Users Guide
Page 37
Publication Index A AnsweringCalls......................................... 2–1 Answering Subdued Off-Hook Voice Announcement (SOHVA)Calls........................................ 2–2 AutomaticCallback,Using................................ 7–4 AutomaticSetRelocation,Using ........................... 7–5 C CallForwarding,Using................................... 7–3 CallWaiting,Using ...................................... 7–5 Calls,Answering ........................................ 2–1...
Page 38
M MakingACall .......................................... 3–1 MakingCalls ........................................... 3–1 Messages,Retrieving..................................... 8–1 Messages, Sending System-Supplied LCD.................... 8–1 Messaging ............................................. 8–1 Messaging,UsingStation-To-Station ........................ 8–2 O OutsideCalls,Transferring ................................ 5–1 P Paging................................................. 7–1 Personal...
Page 39
T Telephone Features, Using The Other........................ 7–1 Telephone, Introducing The Single Line...................... 1–1 Telephone, Programming Your............................. 9–1 Telephone, Troubleshooting Your........................... 9–1 TransferringCalls ....................................... 5–1 TransferringOutsideCalls................................. 5–1 Troubleshooting Your Telephone............................ 9–1 TRO(TollRestrictionOverride),Using ...................... 3–4 U...