Christie Projector Mirage WU12K-M Specifications

							Christie Mirage WU12K-M
Christie Mirage WU12K-M – WUXGA (1920 x 1200) – 3 -chip DLP®  – Par t number: 118 - 055101-X X
Image                                                      
brightness dual lamp•   10,500 ANSI lumens (11,550 center lumens) ±10%
single lamp• 5250 ANSI lumens (5775 center lumens) ±10%
contrast• 2500 -10,000:1 (full on/off) • 650:1 ANSI (typical)
uniformity• 80% brightness uniformity
Displaytype• 
 3-chip 0.96" DMD
native resolution• WUXGA (1920 x 1200)
frame delay• As low as one frame
Lamp type• Dual 350W P-VIP® Osram
                        estimated                         lifehigh power• 1500 hrs @ 350W
low power• 2000 hrs @ 300W (eco mode)
Inputstandard•  Slot 1-2 populated, standard: two Dual Link DVI-D (330 MHz) input cards (each has VGA (165 MHz) for 3D  or dual input 3D compatibility) with HDMI 1.3 receiver • Slot 3-4 unpopulated  
optional • Analog BNC • Dual-link DVI • Dual SD/HD-SDI • Video Decoder • Twin HDMI • DMX512 interface card
signals • HDTV formats VGA through to WQXGA (2560 x 1600) • Accepts all current 2D HDTV/DTV formats (optional input module may be required)  •  HDMI 1.3 receiver supports mandatory HDMI 1.4a 3D modes of operation • 24-144Hz triple flash 3D support available for -02 and later      models updated with latest firmware2 • Optional multi-standard video decoder • Horizontal and vertical scaling, all inputs
pixel clock• 330 MHz
scan rates • Horizontal: 15-120kHz • Vertical: 23.97-150Hz (frame lock maximum 120Hz) • 48-60Hz frame doubled or dual input 3D• 96-120Hz frame rate up to 1920 x 1200 • 24-144Hz triple flash 3D support available for -02 and later models u\
pdated with latest firmware2
Inputs/outputs, control and networking• RS-232 in/out • RS-422 in • Ethernet (10/100) • GPIO (RS-232 9 Pin male connector) • Built-in backlit LCD keypad  •   Remote control (with optional wired XLR connection)
Optical system• Dust-sealed, 3-chip DMD light engine • Motorized horizontal and vertical lens offset • Scheimpflug (tilt) adjustment  • Built-in light shutter • Tool-free lens insertion system
Lensesfixed• 0.67:1 HD/WU ILS Lens* • 1.1:1 HD/WU ILS Lens
zoom• 1.16-1.49:1 HD/WU ILS Lens** • 1.4-1.8:1 HD/WU ILS Lens • 1.8-2.6 HD/WU ILS Lens  • 2.6-4.1:1 HD/WU ILS Lens • 4.1-6.9:1 HD/WU ILS Lens • 6.9-10.4:1 HD/WU ILS Lens 
offsets1 •  
All lenses ±112% Vertical ±42% Horizontal except those noted below   * 0.69:1 fixed lens ±22%V ±6%H ** 1.16-1.49:1 zoom lens ±82\
%V ±38%H
Accessoriesstandard• IR remote • Power cord • GPIO 3D sync cable
optional• Coarse dust filter • Fog juice filter • Ceiling mount • Ceiling mount extension • ILS lens adapter kit • Portrait display adapter • Stacking frame • Christie® AutoStack™ 
Enhanced feature sets2• LiteLOC™ • Comprehensive Color Adjustment (CCA™) • Embedded Christie Twist™ image warping and edge-blending  • Intelligent Lens System (ILS™) for zoom, focus, horizontal and ver\
tical offset for all lenses • Auto setup •   Digital keystone correction• Dynamic iris • Menus in five languages • 99 channel memories • Black level blending • 24/7 operation
Power requirements operating voltage• 100-240 VAC 50/60Hz
operating current• 12A max @ 100-120 VAC • 6A max @ 200-240 VAC
dissipation• 4508 BTU/hr
Dimensionssize • (LxWxH): 22.1 x 19.7 x 10.2" (561 x 500 x 259mm)
shipping size• (LxWxH): 29.0 x 27.0 x 24.6" (735 x 685 x 625mm) 
weight• 55lbs (25kg) (without lens)
shipping weight• 80lbs (36kg)
Operating environment• Temperature: 40-95°F (5-35°C) • Humidity: 20-80% non-condensing
Regulatory approvals • Directives (EC) 2002/95/EC (RoHS); 2002/96/EC (WEEE); Regulation (EC\
) No. 1907/2006 (REACH) • CAN/CSA C22.2 No. 60950-1 • UL 60950-1 • IEC 60950-1 • FCC, Part 15, Subpart B, Class A • EN55022/CISPR22 Class A • EN55024/CISPR24 •   Certifications marks (check with Christie for latest update): cULus \
(Canada & US), CE (EU), CCC (China), GoST-R (Russia),  KC (Korea), PSE (Japan), C-Tick (Australia & New Zealand)
Limited warranty  • Three years parts and labor (including light engine) • Contact an authorized Christie representative for full details of our limited warranty
Corporate officesWorldwide officesIndependent sales  consultant offices
Christie Digital Systems USA, Inc  USA – Cypress  ph: 714 236 8610 
Christie Digital Systems Canada Inc.  Canada – Kitchener  ph: 519 744 8005
United Kingdom  ph: +44 (0) 118 977 8000 
Germany  ph: +49 2161 664540 
France  ph: +33 (0) 1 41 21 44 04 
Spain  ph: +34 91 633 9990
Eastern Europe and  Russian Federation  ph: +36 (0) 1 47 48 100
United Arab Emirates  ph: +971 (0) 4 299 7575
India  ph: (080) 41468940
Singapore  ph: +65 6877 8737
China (Shanghai)  ph: +86 21 6278 7708
China (Beijing)  ph: +86 10 6561 0240
Japan (Tokyo)  ph: 81 3 3599 7481
Korea (Seoul)  ph: +82 2 702 1601
Italy  ph: +39 (0) 2 9902 1161
South Africa  ph: +27 (0) 317 671 347
For the most current specification information, please visit www.christiedigital.comCopyright 2011 Christie Digital Systems USA, Inc. All rights reserved. All brand names and product names are trademarks, registered trademarksor tradenames of their respective holders. Christie Digital Systems Canada Inc.’s management system is registered to ISO 9001 and ISO 14001.Performance specifications are typical. Due to constant research, specifications are subject to change without notice.Printed in Canada on recycled paper. 3054 Sept 11
1 Values are for reference and should be validated with the Christie lens calculator.  2 Some features may not be functional on initial product shipments but will be enabled via software upgrade when available.