Casio Lk 60 Owners Manual

E-10
To delete characters using the DEL key
Example: To change the word ÒcommmputerÓ to ÒcomputerÓ.
1. Use H and J to move the cursor under the first (far left) ÒmÓ.
2. Press DEL twice to delete the two mÕs at the cursorÕs position, shifting ÒmputerÓ
to the left as you do.
3. Press FUNC and then J to jump back to the end of the characters for more
input.
Clearing the DisplayUse the following procedure to clear all input text from the display.
To clear the displayPress FUNC and then DEL (CLS).
At this...

E-11
Text EffectsThere are three text effects that you can assign: shading, underlining, and boxed
text. The following shows examples of each.
Shading:
Underlining:
Boxed Text:
Text effect changes are applied to printed text only. The appearance of the
displayed text does not change, but the text effect indicators will show you when
a text effect is being used.
Important!
·Any text effect specification you make is applied to all the characters on the
display. You cannot make multiple specifications for...

E-12
·An easy way to remove the backing from a tape
and expose the adhesive surface is to bend the
tape near one of its ends. This should cause the
tape and its backing to separate, allowing you to
pull them apart.
Mirror Image PrintingWhen you specify mirror image for text, it is printed in reverse image. Use mir-
ror image when you plan to print on transparent tape, with the printing on the
inside. When viewed through the transparent tape, the text will appear normal.
Normal
Mirror Image
To turn mirror...

E-13
4. Press SET to store the text in memory or ESC to abort the store procedure
without storing anything.
·You can have only one block of text stored in memory.
·If you perform the data store operation while there is already a block of text in
memory, the message ÒOVR?Ó (ÒOK to overwrite the existing text?Ó) appears
when you press SET in step 4. When this happens, press SET again to replace
the existing data with the new data, or ESC to abort the store procedure
without storing anything.
To recall text...

E-14
Initial Power On SettingsThe following are the initial settings of the Label Printer whenever you turn it
power on.
Initializing the Label PrinterIf you experience serious malfunction of the Label Printer or if operation fails
completely, try performing the following operation to initialize the printer.
Important!
·Initializing the Label Printer deletes all memory contents. Make sure you have
a back-up copy of text stored in memory if you need it.
To initialize the Label Printer1. Turn power off.
2....

E-15
Troubleshooting
· Power Supply
· Text  Input
Nothing appears on the display.
Possible Cause Action
Low batteries
Batteries loaded
incorrectlyReplace batteries.
Remove batteries and reload them correctly.
Cannot input text.
Possible Cause Action
FUNC key has been
pressed.Press ESC to clear FUNC key operation.
Back cover is not closed
completely.
No more tape left in the
cartridge.
Tape jamSecurely close the back cover.
Replace the tape cartridge with a new one.
Remove the tape cartridge and pull out...

E-16
· Tape  Cutting
· Using Labels
Cannot cut tape.
Possible Cause Action
Tape cutter blade is dull. Take the label printer to the dealer from whom
you purchased it to have the tape cutter blade
replaced.
Printed text is cut off by tape cut operation.
Possible Causes Action
Out of tape Replace the tape cartridge with a new one.
Label will not adhere to a surface.
Possible Causes Action
Peel the backing paper from the back of the
tape to expose the adhesive.
Labels do not adhere well to surfaces that...

E-17
Alpha Characters Symbols 

E-18
Specifications
Model: KL-60
Input
Keyboard Layout: Typewriter (QWERTY)
Character Types
Alpha (English and other languages): 151
Numbers: 10
Symbols: 46
Display
Type: Liquid crystal display
Columns: 4
Character matrix: 5´7-dot
Printing
Type: Thermal transfer
Width: 5mm
Character Matrix: 16´16-dot
Character font: Sans-serif
Character effects: Shade, underline, box
Character sizes: 1´1, 1´2, 1´3 (6mm tape);
1´1, 1´2, 1´3, 2´1, 2´2, 2´3 (other tapes)
Number of lines: 1 (6mm tape); 1 or 2 (other tapes)...

CASIO COMPUTER CO., LTD.
6-2, Hon-machi 1-chome
Shibuya-ku, Tokyo 151-8543, Japan
MO0105-A Printed in China/ImprimŽ en Chine
A344043-1