Casio Exilim Ex Z5 Users Guide

INTRODUCTION
11
• Color Correction (page 131)
Simply record the image of an old photograph to restore
its colors.
• MOTION PRINT (page 138)
Capture frames from a movie and create still images that
are suitable for printing.
• Calendar screen (page 140)
A simple operation displays a full-month calendar on the
camera’s monitor screen. Each day of the full-month
calendar shows a thumbnail of the first file recorded for
that date, which helps to make searching for a particular
file quicker and easier.
•...

INTRODUCTION
12
Precautions

 General Precautions
Be sure to observe the following important precautions
whenever using the EX-Z5.
All references in this manual to “camera” refer to the
CASIO EX-Z5 Digital Camera.
• Never try to take pictures or use the built-in display while
operating a motor vehicle or while walking. Doing so
creates the risk of serious accident.
• Never try to open the case of the camera or attempt your
own repairs. High-voltage internal components create the
risk of electric shock...

INTRODUCTION
13
• Never fire the flash while it is too close to the subject’s
eyes. Intense light from the flash can cause eye damage
if it is fired too close to the eyes. This is especially true
with young children. When using the flash, the camera
should be at least one meter (3.3´) from the eyes of the
subject.
• Keep the camera away from water and other liquids, and
never let it get wet. Moisture creates the risk of fire and
electric shock. Never use the camera outdoors in the rain
or snow, at the...

INTRODUCTION
14

Test for proper operation before using the
camera!
Before using the camera to record important images, make
sure you first record a number of test images and check the
results to ensure that the camera is configured correctly
and operating properly.

Data Error Precautions
• Your digital camera is manufactured using precision
digital components. Any of the following creates the risk
of corruption of data in file memory.
— Removing the battery or memory card while the
camera is performing...

INTRODUCTION
15

Operating conditions
• This camera is designed for use in temperatures ranging
from 0°C to 40°C (32°F to 104°F).
• Do not use or keep the camera in the following areas.
— In areas subject to direct sunlight
— In areas subject to high humidity or dust
— Near air conditioners, heaters, or other areas subject
to temperature extremes
— Inside of a closed vehicle, especially one parked in the
sun
— In areas subject to strong vibration

Condensation
• When you bring the camera indoors on a...

INTRODUCTION
16

Power Supply
• Use only the special NP-20 rechargeable lithium ion
battery to power this camera. Use of any other type of
battery is not supported.
• This camera does not have a separate battery for the
clock. The date and time will reset whenever the camera
is not supplied power by the battery for about 30 hours.
Be sure to reconfigure these settings after power is
interrupted (page 163).
• Never remove the battery from the camera while the
camera is turned on. Doing so can damage the...

QUICK START GUIDE
17
QUICK START GUIDE
First, charge the battery!
[CHARGE] lamp lights red
during charging.
[CHARGE] lamp goes out
when charging is complete.
T-+
21
1.Charge the rechargeable litium
ion battery (NP-20) that comes
with the camera (page 31).
It takes about 90 minutes to achieve
a full charge.
2.Load the battery into the camera.
(page 34).
1
2
3
Stopper
Downloaded From camera-usermanual.com Casio Manuals 

QUICK START GUIDE
18
1.Press the power button to turn on the camera.
2.Use [
], [], [], and [] to select the language
you want.
3.Press [SET] to register the language setting.
4.Use [
], [], [], and [] to select the geographical
area you want, and then press [SET].
5.Use [
] and [] to select the city you want, and
then press [SET].
6.Use [
] and [] to select the summer time (DST)
setting you want, and then press [SET].
7.Use [
] and [] to select the date format setting
you want, and then press...

QUICK START GUIDE
19
To record an image
See page 50 for details.
1.Press [] (REC).
This enters the REC (recording) mode.
2.Point the camera at the subject, use the monitor
screen to compose the image, and then press
the shutter button half way.
When the camera finishes its Auto Focus operation, the
focus frame will turn green and the operation lamp lights
green.
3.Holding the camera still, gently press the shutter
button all the way down.
1
3
23N
0606/1212/24241212:
3838
5
Operation lamp Focus frame...

QUICK START GUIDE
20
1.Press [] (PLAY).
2.Press [] ( ).
3.Use [] and [] to display the image you want to
delete.
4.Use [
] and [] to select “Delete”.
To exit the image delete operation without deleting anything,
select “Cancel”.
5.Press [SET] to delete the image.
To delete an image
See page 152 for details.
1.Press [] (PLAY).
This enters the PLAY (playback) mode.
2.Use [] and [] to scroll through the
images.
To view a recorded image
See page 124 for details.
1
2
1
2, 3, 4, 5
Downloaded From...