Canon Pixma Mp510 Quick Start Guide

27
Printing from a Memory Card
Inserting the Memory Card
1
Turn on the machine.
See “Turning the Machine On and Off” on page 2.
2Open the Card Slot Cover.
3Insert one and only one memory card into the Card Slot.
* Be sure to attach the memory card to the special adapter before inserting it into the Card  Slot.
4Confirm that the  Access lamp has lit up.
5Close the Card Slot Cover.
Card TypeInserting Card
zCompact Flash (CF) card
zMicrodrive
zxD-Picture card*
zSmartMedia
zMEMORY STICK
zMEMORY STICK PRO...

28Printing from a Memory Card
Removing the Memory Card
1
Open the Card Slot Cover.
2Make sure that the  Access lamp is not flashing, then remove the memory card.
3Close the Card Slot Cover.
Printing Photographs (Single-photo Print)
1
Turn on the machine, and load printing paper.
Load paper other than A4, Letter, or B5-sized plain paper in the Auto Sheet Feeder.
See “Turning the Machine On and Off” on page 2 and “Loading Printing Paper” on page 6.
2Make sure that the proper paper source is selected.
See...

29
Printing from a Memory Card
Photo index print
Prints an index of all the photos saved on a memory card.
DPOF print
Prints according to the Digital Print Order Format  (DPOF) settings on your digital camera, if you 
have specified them.
Printing Using the Photo Index Sheet
1
Turn on the machine, and load A4 or Letter-sized paper.
See “Turning the Machine On and Off” on page 2 and “Loading Printing Paper” on page 6.
2Make sure that the proper paper source is selected.
See “Changing the Paper Source” on...

30Printing Photographs Directl y from a Compliant Device
Printing Photographs Directly from a 
Compliant Device
Printing from a PictBridge Compliant Device
You can connect a PictBridge compliant device such  as a digital camera, camcorder, or mobile 
phone and print recorded images directly without using a computer.
A device with this mark is PictBridge-compatible.
„Connecting a PictBridge Compliant Device
To connect a PictBridge compliant device to  this machine, use a USB cable recommended by 
the...

31
Printing Photographs Direct ly from a Compliant Device
(1)Make sure that the PictBridge compliant device 
is turned off.
(2) Connect the PictBridge compliant device to the 
machine using a USB cable recommended by 
the manufacturer of the device.
The device turns on automatically.
If your device does not turn on automatically, 
turn it on manually.
(3) Set up the PictBridge compliant device for 
direct printing.
 will appear on the LCD of the device when 
the machine is correctly connected.
„ Printing...

32Printing Photographs Directl y from a Compliant Device
The following sizes and types of printi ng paper can be loaded according to the  Paper size and 
Paper type  settings.
*1 Exclusively used to print photo stickers.  When printing on sticker paper, select 10x15 cm/4 x 
6  in  Paper size .
*2 Can be selected only on certain Canon-brand PictBridge compatible devices.
*3 Plain Paper  can be selected for  Paper type only when Paper size is set to A4 or 8.5 x 11 
(Letter) . When Paper type  is set to...

33
Printing Photographs Direct ly from a Compliant Device
zDate/File No. Print Setting
You cannot change this setting on this machine.  The setting on the PictBridge compliant device 
is applied.
If the images already have dates  superimposed when shot, set this PictBridge setting item to 
Off . If you select  Date, File No. , or Both , the date and/or file number will be printed over the 
date printed by the camera’s function.
Note
z Never disconnect the USB cable during printing unless when explicitly...

34Routine Maintenance
Routine Maintenance
Replacing an Ink Tank
When ink runs out, replace the ink tank. The machine  will not print if the wrong type of ink tank is 
used, or if it is installed in the incorrect position.
The machine uses the following ink tanks.
„ Getting the Ink Level Information
You can confirm the ink level in each ink tank by  the ink lamps. Open the Scanning Unit (Printer 
Cover) of the machine to confirm how the ink lamps light or flash.
Ink is low: 
......Repeats
The ink lamp...

35
Routine Maintenance
„ Knowing When to Replace Ink Tank
Identify the empty ink tank on the LCD and replace it.
If the “!” symbol is displayed above an ink tank
If the machine detects low ink when you start printing, an error message such as the following 
appears on the LCD. 
Obtain a replacement t ank as soon as possible.
(A) Ink tank with low ink
If the “X” symbol is displayed above an ink tank
(B) Ink tank that may have run out of ink
z Ink may have run out. Replacing the ink tank is recommended.
z...

36Routine Maintenance
„Replacing Ink Tanks
When ink tanks run out of ink, replace them using the following steps.
1Open the Front Feeder.
2Make sure that the machine is turned on, lift 
the Scanning Unit (Printer Cover) open, and 
set the Scanning Unit Support to hold the 
cover. 
The Print Head Holder moves to the center.
3Remove the ink tank whose lamp is flashing fast.
(1) Push the tab and remove the ink tank.
Important
Handling Ink
zTo maintain optimal printing quality, we recommend the use of...