Canon network camera VBM600VE User Manual

List of Log Messages
8-11
8
Appendix
B201 Event notification failure [info] 
B202 Event reception failure [info] 
B203 Audio message send error [info] 
B204 Audio message reception failure [info] 
B301 Audio device error [err] 
B401 Audio device initialization failed [err] B402 Audio server initialization failed [err] 
B403 Settings change failed [err] 
„Application (video-related) messages
V001 Starting and shutdown of video server [info] 
V020 Starting intelligent service [info] 
V020 Shutting down...

8-12
V320 Internal error in intelligent service [err] 
V321 Pseudo mode setting error in intelligent service 
[err] 
V400 Video input initialization error [crit] 
V401 Video input command error [crit] V402 Video input frozen [crit] 
V403 Video input error [crit] 
V420 Could not start intelligent service [crit] 
V421 Intelligent service error [crit] 
„Application (SD card) messages
M001 Starting and stopping of SD control module 
[info] 
Description cannot work intelligent [%1] [%2] [%3] . 
(V320) 
%1...

List of Log Messages
8-13
8
Appendix
„HTTP Server Messages
H143 User name specification error [notice] 
H144 Password specification error [notice] 
H145 Connection denied due to host access limitation 
[notice] 
H201 Timeout disconnect [warning] 
„System messages
S001 System started [info] 
S002 System settings changed [info] S010 Event service started [info] 
S011 Event service shut down [info] 
S012 External device service started [info] 
S013 External device service shut down [info] 
S014 Timer...

8-14
S240 Camera error [warning] 
S250 PAN/TILT error [warning] (VB-M40)
S306 Error on saving settings [err] 
S307 Error on saving settings [err] 
S310 Working error in event service [err] 
S311 Working error in external input/output service 
[err] S312 Working error in timer service [err] 
S320 PAN/TILT operation error [err] (VB-M40)
S410 Event service initialization error [crit] 
S411 External input/output service initialization error 
[crit] 
Description serviceman call (S240)
Meaning A camera error...

List of Log Messages
8-15
8
Appendix
S412 Timer service initialization error [crit] 
S413 Timer service runtime error [crit] 
S501 Fan stop detected [alert] (VB-M600VE)
S502 Temperature fuse disconnect detected [alert] 
(VB-M600VE)
Description timer initialization error [%1] [%2] (S412) 
%1 Error number
%2 Cause of error
Meaning An error occurred in the initialization of the 
timer service. 
CountermeasureIf the problem persists after rebooting, the 
camera is faulty. Arrange for servicing. 
Description...

8-16
Messages displayed in the Information Field
Messages displayed in the information field of the viewer are classified into the following three types.
„Information Message
„Warning Message
List of Viewer Messages
IconCategoryExplanation
  Information Message Help messages on various buttons, pull-down lists, etc., as well as frame rate and other 
information from the camera are shown. 
  Warning Message A message will be displayed notifying the user when camera control privileges cannot 
be obtained,...

List of Viewer Messages
8-17
8
Appendix
No audio device.  The [Audio] button has been clicked when there is no audio device or the 
audio device has been disabled in the PC. 
Failed to initialize Canon Network Camera Audio 
Receiver.ActiveX plugin is not installed within ten seconds after clicking the [Audio] 
button.
MessageExplanation
Image display for Viewer PTZ use is restricted. The image display for the Viewer PTZ is restricted by settings in the camera.
MessageExplanation 

8-18
It is recommended that you write down the settings for respective camera functions. If you have forgotten the settings and 
want to set the camera from the beginning, restore the factory default settings first. 
*For factory default settings, see p. 8-20. 
Restoring the Initial Setting from the 
Maintenance Page in the Web Browser
To display the settings menu, you need to enter the IP 
address of the camera, user name and administrator 
password (p. 4-2).  
The maintenance page appears. 
A...

Restore Settings
8-19
8
Appendix
For dome case attachment, see the “Installation 
Guide.”
Important
If the reset switch is pushed, network-related settings will also 
be restored to factory default settings including the cameras IP 
address, subnet mask, default gateway address, etc. 
Accordingly, you can no longer operate the camera from the 
PC you were using to connect to the camera before. When 
initializing the camera, use the “VB Initial Setting Tool” installed 
in your PC to set an IP address...

8-20
List of Factory Default Settings
ItemSetting
  User Name (Administrator ID) 
  Administrator passwordroot
camera
  Path to setting pages admin

LAN Interface
Maximum Packet Size

IPv4 Address Setting Method
IPv4 Address  
Subnet Mask
IPv4 Default Gateway Address 

IPv6
Auto
IPv6 Address (Manual) 
Prefix Length
IPv6 Default Gateway Address
IPv6 Address (Auto) 
 DNS
Name Server Address 1
Name Server Address 2
Host Name
Host Name Registration with DDNS

SNMP
   Community Name
   Administrator Contact...