Canon Ir 2020 User Guide

ix
Keys Used in This Manual
The following symbols and key names are a few examples of how keys to be 
pressed are expressed in this manual:
Control Panel Keys:  + [Key Name]
Illustrations Used in This Manual
Illustrations used in this manual are those displayed when the iR2016 has the 
following optional equipment attached to it: the Fax Panel-A1 (with Super G3 FAX 
Board-T1), Feeder (DADF-P1), Finisher-U1, Additional Finisher Tray-C1, and 
Cassette Feeding Module-J1. 
Examples:  [Start]
 [Stop]
 

x
Legal Notices
R&TTE Directive
Laser Safety
This product is certificated as a Class 1 laser product under IEC60825-1:1993 and 
EN60825-1:1994. This means that the product does not produce hazardous laser 
radiation.
Since radiation emitted inside the product is completely confined within protective 
housings and external covers, the laser beam cannot escape from the machine 
during any phase of user operation. Do not remove protective housings or external 
covers, except as directed by the equipment’s...

xi
Additional Information
When servicing or adjusting the optical system of the product, be careful not to 
place screwdrivers or other shiny objects in the path of the laser beam. Also, 
accessories such as watches and rings should be removed before working on the 
product. The reflected beam, whether visible or invisible, can permanently damage 
your eyes. 
The labels shown below are attached to the laser scanner unit inside the machine 
and next to the toner cartridge behind the front cover.
This...

xii
International ENERGY STAR Program
EMC Directive
This equipment conforms with the essential requirements of EC Directive 89/336/
EEC.
We declare that this product conforms with the EMC requirements of EC Directive 
89/336/EEC at nominal mains input 230V, 50Hz although the rated input of the 
product is 220-240 V, 50/60 Hz.
•Use of shielded cable is necessary to comply with the technical requirements of 
EMC Directive.
As an ENERGY STA R® Partner, Canon Inc. has determined that 
this machine meets the...

xiii
Abbreviations Used in This Manual
In this manual, product names and model names are abbreviated as follows:
Trademarks
Canon, the Canon logo, and iR are trademarks of Canon Inc.
Adobe and Adobe Acrobat are trademarks of Adobe Systems Incorporated.
Microsoft, Windows, and Windows NT are registered trademarks of Microsoft 
Corporation (US) in the United States and other countries.
Windows Server is a trademark of Microsoft Corporation in the United States and 
other countries.
Other product and...

xiv
Copyright
Copyright 2005 by Canon Inc. All rights reserved.
No part of this publication may be reproduced or transmitted in any form or by any 
means, electronic or mechanical, including photocopying and recording, or by any 
information storage or retrieval system without the prior written permission of 
Canon Inc.
Disclaimers
The information in this document is subject to change without notice.
CANON INC. MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS 
MATERIAL, EITHER EXPRESS OR IMPLIED, EXCEPT...

xv
Legal Limitations on the Usage of Your Product 
and the Use of Images
Using your product to scan, print or otherwise reproduce certain documents, and 
the use of such images as scanned, printed or otherwise reproduced by your 
product, may be prohibited by law and may result in criminal and/or civil liability. 
A non-exhaustive list of these documents is set forth below. This list is intended to 
be a guide only. If you are uncertain about the legality of using your product to scan, 
print or...

xvi
 Important Safety Instructions
Please read these “Important Safety Instructions” thoroughly before operating the 
machine. As these instructions are intended to prevent injury to the user or other 
persons or destruction of property, always pay attention to these instructions. Also, 
since it may result in unexpected accidents or injuries, do not perform any operation 
unless otherwise specified in the manual. Improper operation or use of this 
machine could result in personal injury and/or damage...

xvii
CAUTION
•Do not install the machine in unstable locations, such as on unsteady platforms or 
inclined floors, or in locations subject to excessive vibrations, as this may cause the 
machine to fall or tip over, resulting in personal injury.
•Never block the ventilation slots and louvers on the machine. These openings are 
provided for proper ventilation of working parts inside the machine. Blocking these 
openings can cause the machine to overheat. Never place the machine on a soft 
surface, such as...

xviii
Power Supply
WARNING
•Do not damage or modify the power cord. Also, do not place heavy objects on the 
power cord, or pull or excessively bend it, as this could cause electrical damage and 
result in a fire or electrical shock.
•Keep the power cord away from a heat source; failure to do this may cause the power cord coating to melt, resulting in a fire or electrical shock.
•Do not connect or disconnect the power cord with wet hands, as this may result in 
electrical shock.
•Do not connect the power...