Canon Eos Rebel T4i 650d Instruction Manual

21
Nomenclature
Display off sensor (p.50, 213)Dioptric adjustment knob (p.42)
Card slot
cover (p.31)
Access lamp  (p.32)
Battery compartment
cover release lever  (p.30)
Battery compartment cover
(p.30)
Viewfinder eyepiece
Eyecup (p.304)  Live View shooting/
Movie shooting button (p.144/170)
 AE lock/
FE lock button/
Index/Reduce button
(p.121/122/238/240, 283)

AF point selection/
Magnify button
(p.97/240, 283)
Speaker
(p.250)
DC cord hole
(p.302)
 Info button
(p.50, 82, 146, 175, 209)
 Menu
button...

22
Nomenclature
Shooting Settings (in Creative Zone modes, p.24)
The display will show only th e settings currently applied.
Shutter speed
Shooting mode Aperture
ISO speed (p.90)
Self-timer countdown Number of possible shots
Battery check
 (p.35)
zxcn
Quick Control icon
 (p.44)
Exposure level indicator
Exposure compensation
amount (p.117)
AEB range (p.119)
White balance (p.135)
 Q Auto
 W  Daylight
E Shade
R Cloudy
 Y Tungsten light
 U   White fluorescent light
 I  Flash
 O  Custom Image-recording...

23
Nomenclature
Viewfinder Information
The display will show only the settings currently applied.
AF point activation indicator  
AF points
 Flash-ready 
 Improper FE lock warning Max. burst
 
Focus
 confirmation light
 High-speed sync
 (FP flash)
 FE  lock/FEB  in-progress
 Flash exposure
 compensation
Card full warning (FuLL)
Card error warning (Card)
No card warning ( Card)
Exposure level indicator
  Exposure compensation amount
 AEB range
Red-eye reduction lamp-on indicator
 Highlight tone priority...

24
Nomenclature
Mode Dial
The Mode Dial includes the Basic Zone modes and Creative Zone 
modes.
Basic Zone
All you do is press the shutter button. 
The camera sets everything to suit the 
subject or scene.
A : Scene Intelligent Auto  (p.58)
7 : Flash Off  (p.63)
C : Creative Auto  (p.64)
Creative Zone
These modes give you more control for 
shooting various subjects.
d
: Program AE (p.84)
s : Shutter-priority AE (p.108)
f : Aperture-priority AE (p.110)
a : Manual exposure (p.113)
Image Zone 2 : Portrait...

25
Nomenclature
Lens
Lens without a distance scale
Lens with a distance scale
Image Stabilizer switch (p.41)
Lens mount index  (p.39) Contacts (p.17)
Zoom ring 
(p.40)
Focus mode switch
 (p.39)
Focusing ring (p.100, 164)
Hood mount (p.338) Zoom position index (p.40)
Filter thread
(front of lens) (p.338)
Focus mode switch  (p.39)
Zoom ring  (p.40)
Image Stabilizer switch  (p.41)Lens mount index (p.39)
Contacts (p.17)
Hood mount (p.338)
Distance scale
Zoom position index (p.40)
Focusing ring (p.100, 164)...

26
Nomenclature
Battery Charger LC-E8
Charger for Battery Pack LP-E8 (p.28).
Battery Charger LC-E8E
Charger for Battery Pack LP-E8 (p.28).
Battery pack slotPower plug
Charge lamp
Full-charge lamp
IMPORTANT SAFETY INSTRUCTIO NS-SAVE THESE INSTRUCTIONS.
DANGER-TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, 
CAREFULLY FOLLOW THESE INSTRUCTIONS.
For connection to a supply  not in the U.S.A., use an attachment plug adapter 
of the proper configu ration for the power outlet, if needed.
Power cord 
Power cord...

27
Getting Started
This chapter explains preparatory steps before you start 
shooting and basic camera operations.
Attaching the Strap
Pass the end of the strap through 
the camera’s strap mount eyelet 
from the bottom. Then pass it 
through the strap’s buckle as shown 
in the illustration. Pull the strap to 
take up any slack and make sure 
the strap will not loosen from the 
buckle.
 The eyepiece cover is also 
attached to the strap (p.304).
Eyepiece cover
COPY  

28
1Remove the protective cover.
 Detach the protective cover provided 
with the battery.
2Attach the battery.
 As shown in the illustration, attach the 
battery securely to the charger.
  To detach the battery, follow the 
above procedure in reverse.
3Recharge the battery.
For LC-E8
 As shown by the arrow, flip out the 
battery charger’s prongs and insert 
the prongs into a power outlet.
For LC-E8E
 Connect the power cord to the 
charger and insert the plug into a 
power outlet. 
X Recharging starts...

29
Charging the Battery
 Upon purchase, the batter y is not fully charged.
Recharge the battery before using.
  Recharge the battery on the day before or on the day it is to be 
used.
Even during storage, a charged battery will gradually drain and lose 
its capacity.
  After recharging the battery, de tach it and disconnect the 
charger from the power outlet.
  When not using the camera, remove the battery.
If the battery is left in the came ra for a prolonged period, a small 
amount of power current is...

30
Load a fully charged Battery Pack LP-E8 into the camera.
1Open the cover.
 Slide the lever as shown by the 
arrows and open the cover.
2Insert the battery.
 Insert the end with the battery 
contacts.
  Insert the battery until it locks in 
place.
3Close the cover.
 Press the cover until it snaps shut.
Open the cover and remove the 
battery.
 Press the battery release lever as shown 
by the arrow and re move the battery.
 To prevent short circuiting of the 
battery contacts, be sure to attach the...