Brother HL 2070NR User Manual

							Driver and software
2 - 15
2
Brother Laser driver for Macintosh®
For Mac OS® 9.1 to 9.2
1Open the Extensions folder located in the System Folder on the Macintosh HD.
2Drag all these following files in the Extensions folder to the trash.
 BR_PrintMonitor(laser)
 Brother Laser
 Brother Laser(IP)
Note
There may be several of the USB Print Driver(BRXXX)* and BR_PrintMonitor(BXX)* extensions with different 
endings.
*The x refers to the model of your machine.
3Restart the Macintosh®.
4Once the computer has restarted you can then dump the trash.
For Mac OS® X 10.2.4 or greater
1Disconnect the USB cable between the Macintosh and your printer.
2Restart the Mac.
3Log on as an Administrator.
4Run the Print Center (from the Go menu > Applications > Utilities > Print Center folder), then choose 
the printer you want to remove and remove it by clicking the Delete button.
5Click on the name of your printer in the printer list. From the Finder menu, delete the Printer.
6Drag the HL-MFLPro folder (from the Mac OS X 10.X > Library > Printers > Brother) into the Trash 
bin and then empty the trash bin.
7Restart the Macintosh®.
 
						

							Driver and software
2 - 16
2
Software
Note
This section is for Windows®.
Software for Networks
Note
This section is for HL-2070N.
BRAdmin Professional
The BRAdmin Professional software is a utility for managing your Brother network enabled printers that are 
running under Windows® 95/98/Me, Windows NT® 4.0 and Windows® 2000/XP. 
It allows you to easily configure and check the status of your printer on the network.
Driver Deployment Wizard
This installer includes the Windows® printer driver and Brother network port driver (LPR and NetBIOS). 
If the administrator installs the printer driver and port driver using this software, the administrator can save 
the file to the file server or send the file by E-mail to users. Then, each user just clicks that file to have the 
printer driver, port driver, IP address, and so on, automatically copied to their PC.
Network Print Software
This installer includes the port monitors (Peer-to-Peer Printing software). 
They allow you to print through the Network (LAN) under Windows
®.
Web BRAdmin
The Web BRAdmin software is designed to manage all LAN/WAN Brother network connected devices. By 
installing the Web BRAdmin server software on a computer running IIS*, Administrators with a Web browser 
can connect to the Web BRAdmin server, which then communicates with the device itself. Unlike the 
BRAdmin Professional software - which is designed for Windows
® systems only - the Web BRAdmin server 
software can be accessed from any client computer with a web browser that supports Java 2.
You can download the Web BRAdmin software from our web site at http://solutions.brother.com/
IIS* = Internet Information Server 4.0 or 5.0
Web BRAdmin and Internet Information Server 4.0 is supported on the following operating systems:
■Windows NT
® 4.0 Server
Web BRAdmin and Internet Information Server 5.0 is supported on the following operating systems:
■Windows
® 2000 Server
■Windows
® 2000 Advanced Server
■Windows
® XP Professional
■Windows
® 2000 Professional
 
						

							Driver and software
2 - 17
2
Automatic Emulation Selection
Note
This section is for HL-2070N.
This printer has an Automatic Emulation Selection feature. When the printer receives data from the computer, 
it automatically chooses the emulation mode. This feature has been set at the factory to ON.
You can change the setting using Remote Printer Console or Web browser. 
Note
For more information about Remote Printer Console, see the following section.
The printer can choose from the following combinations: 
Remote Printer Console
Remote Printer Console is software to change many of the printer settings independently of your software 
application. For example, you can change the settings for printer margin, sleep mode, character set and so 
on. These settings are then remembered and used by the printer.
How to use and install the Remote Printer Console software
To use the Remote Printer Console software, follow the steps below.
For Windows
®
1Insert the CD-ROM into your CD-ROM drive and close the opening screen when it appears.
2Open Windows® Explore and select the CD-ROM drive.
3Double-click the RPC folder.
4Refer to the RPC_User’s_Guide.pdf for how to install and use the Remote Printer Console.
For Macintosh
®
1Insert the CD-ROM into your CD-ROM drive. Double-click the HL2000 icon on the desktop.
2Double-click the RPC folder.
3Refer to the RPC_User’s_Guide.pdf for how to install and use the Remote Printer Console.
Setting 1 (default) Setting 2
HP LaserJet HP LaserJet
EPSON FX-850 IBM ProPrinter XL
 
						

							3
3 - 1
3Control panel
This section refers to the four Light Emitting Diodes (LEDs) (Toner, Drum, Paper, Ready) and a control panel 
button (Go) on the control panel.
The LED indications shown in the table below are used in the illustrations in this chapter.
Note
When the power switch is off or the printer is in Sleep mode, all the LEDs are off.
LED is off
 or   or 
LED is on
 or 
 or LED is blinking
 
						

							Control panel
3 - 2
3
LED Printer status
Sleep mode
The power switch is off or the printer is in Sleep mode. Pressing the Go button 
wakes up the printer from Sleep mode to Ready mode.
Ready to print
The printer is ready to print.
Warming up
The printer is warming up.
Receiving data
The printer is either receiving data from the computer, processing data in 
memory or printing the data.
Data remaining in memory
Print data is left in the printer memory. If the Ready LED blinks for a long time 
and nothing has printed, press the Go button to print the data that is still in 
memory.
Toner low
Indicates that the toner cartridge is nearly empty. Purchase a new toner 
cartridge and have it ready for when Toner Life End is indicated.
The Toner LED alternates turning on for 2 seconds and off for 3 seconds.
 
						

							Control panel
3 - 3
3
Toner life end
Replace the toner cartridge with a new one. See Replacing the toner cartridge 
on page 5-3.
Cartridge position error
The toner cartridge is not installed correctly. Take out the toner cartridge and put 
it back into the printer again.
Drum life end soon
The drum unit is near the end of its life. We recommend that you get a new drum 
unit to replace the current one. See Replacing the drum unit on page 5-8.
The Drum LED alternates turning on for 2 seconds and off for 3 seconds.
No paper fed tray 1
Put paper in the tray. See Printing on plain paper, bond paper or transparencies 
from the paper tray on page 1-7. Then press the Go button. LED Printer status
 
						

							Control panel
3 - 4
3
Front cover is open
Close the front cover of the printer.
Back cover is open
Close the back cover of the printer.
Paper jam
Clear the paper jam. See Paper jams and how to clear them on page 6-5. 
If the printer does not start printing, press the Go button.
No paper fed manual feed slot
Put the paper in the manual feed slot. See Printing on plain paper, bond paper 
or transparencies from the manual feed slot on page 1-10 or Printing on thick 
paper, labels and envelopes from the manual feed slot on page 1-13.
Memory full
The printer memory is full and the printer cannot print full pages of a 
document. See Solving print problems on page 6-15. 
Print overrun
A print overrun occurred and the printer cannot print full pages of a document. 
See Solving print problems on page 6-15.
Drum Error
The corona wire needs to be cleaned. See Cleaning the corona wire on page 
5-14. LED Printer status
 
						

							Control panel
3 - 5
3
Service call indications
If there is an error that cannot be cleared by the user, the printer will show that a service call is needed by 
lighting up all the LEDs as shown below.
If you see the service call indication above, turn off the power switch, wait a few seconds, and then turn it 
back on and try to print again.
If you cannot clear the error and see the same service call indication after turning the printer back on, call 
your dealer or a Brother authorized service representative. 
When you press the Go button, the LEDs will light up as shown in Table 1. See Table 1: LED indications while 
pressing Go button on page 3-6 to identify the error.
For example, the LED indication below shows a fuser unit failure.
 
						

							Control panel
3 - 6
3
Table 1: LED indications while pressing Go button
Make a note of the indication and report the error status to your dealer or a Brother authorized service 
representative by referring to the above table.
Note
Make sure that the front cover is fully closed before you report a service call.
*1 If this error occurs, turn the power switch off, wait a few seconds, and then turn it on again.
Leave the printer for 10 minutes with the power on. If the error occurs again, consult your dealer or Brother 
authorized service representative.
LEDsfuser unit 
failure*1Laser unit 
failureMain motor 
failureMain PCB 
failure
Toner
Drum
Paper
Ready
 
						

							Control panel
3 - 7
3
Control panel button (Go button)
The control panel button has the following functions:
Wake-up
If the printer is in Sleep mode, press the Go button to wake the printer up and go to the Ready state. 
Error recovery
If there is an error, the printer will recover automatically from some errors. If an error is not automatically 
cleared, press the Go button to clear the error, and then continue to use the printer.
Form feed
If the green Ready LED blinks for a long time, press the Go button. The printer will print any data that is left 
in the printer memory.
Cancel printing
While printing press the Go button for about 4 seconds until all the LEDs light up. The Ready and Paper LEDs 
will flash as the job is being cancelled.
Reprint
To reprint the last document, press the Go button for about 4 seconds until all the LEDs light up.