Belkin Router F5D5231-4 User Manual
Have a look at the manual Belkin Router F5D5231-4 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 19 Belkin manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
18 Alternate Setup Method 18 s e c t i o n 1 2 3 4 5 6 7 8 9 10 Alternate Setup Method Step 3 Configure the Router using the Web-Based User Interface Using your Internet browser, you can access the Router’s Web-Based Advanced User Interface. In your browser, type 192.168.2.1 (do not type in anything else such as “http://” or “www”) then press the “Enter” key. Logging into the Router You will see the Router’s home page in your browser window. The home page is visible to any user who wants to see it. To make any changes to the settings of the Router, you have to log in. Clicking the “Login” button or clicking on any one of the links on the home page will take you to the Login screen. The Router ships with no password entered. In the login screen, leave the password blank and click the “Submit” button to log in. Logging out of the Router One computer at a time can log in to the Router for the purposes of making changes to the settings of the Router. Once a user has logged in to make changes, there are two ways that the computer can be logged out. Clicking the “Logout” button will log the computer out. The second method is automatic. The login will time out after a specified period of time. The default login time out is 10 minutes. This can be changed from 1 to 99 minutes. For more information see the section in this User Manual titled “Changing the Login Timeout Setting”.
2019 Alternate Setup Method 2019 Alternate Setup Method Understanding the Web-Based Advanced User Interface The home page is the first page you will see when you access the Advanced User Interface (UI). The home page shows you a quick view of the Router’s status and settings. All advanced setup pages can be reached from this page. (1) Quick Navigation Links You can go directly to any of the Router’s advanced UI pages by clicking directly on these links. The links are divided into logical categories and grouped by tabs to make finding a particular setting easier to find. Clicking on the purple header of each tab will show you a short description of the tab’s function. (2) Version Info Shows the firmware version, boot code version, hardware version, and serial number of the Router. (3) Page Name The page you are on can be identified by this name. This User Manual will sometimes refer to pages by name. For instance “LAN > LAN Set- tings” refers to the “LAN Settings” page. (4) Home Button The home button is available in every page of the UI. Clicking this button will take you back to the “Home” page. (1) (2)(3)(5) (10) (4)(6)(7) (8)(9)
20 Alternate Setup Method 20 s e c t i o n 1 2 3 4 5 6 7 8 9 10 (5) Help Button The “Help” button gives you access to the Router’s help pages. Help is also available on many pages by clicking “more info” next to certain sections of each page. (6) Login/Logout Button This button enables you to log in and out of the Router with the press of one button. When you are logged into the Router, this button will change to read “Logout”. Logging into the Router will take you to a separate login page where you will need to enter a password. When you are logged into the Router you can make changes to the settings. When you are finished making changes, you can log out of the Router by clicking the “Logout” button. For more information about logging into the Router, see the section called “Logging into the Router”. (7) Status Indicator This indicator is visible in all pages of the Router. It tells you the connection status of the Router. When the indicator says “connection OK” in GREEN, the Router is connected to the Internet. When the Router is not connected to the Internet, the indicator will read “no connection” in RED. The indicator is automatically updated when you make changes to the settings of the Router. (8) Internet Settings Shows the settings of the Internet/WAN side of the Router that connects to the Internet. Changes to any of these settings can be made by clicking on the links or by clicking on the “Internet/WAN” Quick Navigation link on the left side of the screen. (9) Features Shows the status of the Router’s NAT, firewall, and wireless features. Changes can be made to the settings by clicking on any one of the links or by clicking the Quick Navigation links on the left side of the screen. (10) LAN Settings Shows you the settings of the Local Area Network (LAN) side of the Router. Changes can be made to the settings by clicking on any one of the links (IP address, subnet mask, DHCP server) or by clicking the “LAN” Quick Navigation link on the left side of the screen. Alternate Setup Method Step 4Configuring your Router for connection to your ISP
2221 Alternate Setup Method 2221 Alternate Setup Method The “Internet/WAN” tab is where you will set up your Router to connect to your Internet Service Provider (ISP). The Router is capable if connecting to virtually any ISP’s system provided you have correctly configured the Router’s settings for your ISP’s connection type. Your ISP connection settings are provided to you by your ISP. To configure the Router with the settings that your ISP gave you, click “Connection Type” (1) on the left side of the screen. Select the connection type you use. If your ISP gave you DNS settings, clicking “DNS” (2) allows you to enter DNS address entries for ISPs that require specific settings. Clicking “MAC address” (3) will let you clone your computer’s MAC address or type in a specific WAN MAC address if required by your ISP. When you have finished making settings, the “Internet Status” indicator will read “connection OK” if your Router is set up properly. Setting your Connection Type From the “Connection Type” page, you can select the type of connection you use. Select the type of connection you use by clicking the radio button (1) next to your connection type and then click “Next” (2). (1) (2) (3)
22 Alternate Setup Method 22 s e c t i o n 1 2 3 4 5 6 7 8 9 10 Setting your ISP Connection Type to Dynamic IP A dynamic connection type is the most common connection type found with cable modems. Setting the connection type to dynamic in many cases is enough to complete the connection to your ISP. Some dynamic connection types may require a host name. You can enter your host name in the space provided if you were assigned one. Your host name is assigned by your ISP. Some dynamic connections may require that you clone the MAC address of the PC that was originally connected to the modem. (1) (2)
24 Alternate Setup Method 24 Alternate Setup Method (1) Host Name This space is provided to enter a host name that needs to be visible to your ISP. Enter your host name here and click “Apply Changes” (3). If your ISP did not assign you a host name, or you are not sure, leave this blank. (2) Change WAN MAC Address If your ISP requires a specific MAC address to connect to the service, you can enter a specific MAC address or clone the current computer’s MAC address through this link. 23 (1) (2)(3)
24 Alternate Setup Method 24 s e c t i o n 1 2 3 4 5 6 7 8 9 10 Setting your ISP Connection Type to Static IP A static IP address connection type is less common than other connection types. If your ISP uses static IP addressing, you will need your IP address, subnet mask, and ISP gateway address. This information is available from your ISP or on the paperwork that your ISP left with you. Type in your information then click “Apply Changes” (5). After you apply the changes, the “Internet Status” indicator will read “connection OK” if your Router is set up properly. (1) IP Address Provided by your ISP. Enter your IP address here. (2) Subnet Mask Provided by your ISP. Enter your subnet mask here. (3) ISP Gateway Address Provided by your ISP. Enter the ISP gateway address here. (4) My ISP Provides More Than one Static IP Address If your ISP assigns you more than one static IP address, your Router is capable of handling up to five static WAN IP addresses. Select “My ISP Provides more than one Static IP address” and enter your additional addresses. (1) (2) (3) (4) (5)
2625 Alternate Setup Method 2625 Alternate Setup Method Setting your ISP Connection Type to PPPoE Most DSL providers use PPPoE as the connection type. If you use a DSL modem to connect to the Internet, your ISP may use PPPoE to log you into the service. If you have an Internet connection in your home or small office that doesn’t require a modem, you may also use PPPoE. Your connection type is PPPoE if: 1) Your ISP gave you a user name and password which is required to connect to the Internet. 2) Your ISP gave you software such as WinPOET, Enternet300 that you use to connect to the Internet; or, 3) You must double-click on a desktop icon other than your browser to get on the Internet. To set the Router to use PPPoE, type in your user name and password in the spaces provided. If you do not have a service name or do not know it, leave the “Service Name” field blank. After you have typed in your information, click “Apply Changes” (6). After you apply the changes, the “Internet Status” indicator will read “connection OK” if your Router is set up properly. (1) User Name This space is provided to type in your user name that was assigned by your ISP. (1) (6) (2) (3) (4) (5)
26 Alternate Setup Method 26 s e c t i o n 1 2 3 4 5 6 7 8 9 10 (2) Password Type in your password and retype it into the “Retype Password” box to confirm it. (3) Service Name A service name is rarely required by an ISP. If you are not sure if your ISP requires a service name, leave this blank. (4) MTU The MTU setting should never be changed unless your ISP gives you a specific MTU setting. Making changes to the MTU setting can cause problems with your Internet connection including disconnection from the Internet, slow Internet access, and problems with Internet applications working properly. (5) Disconnect after X…. The disconnect feature is used to automatically disconnect the Router from your ISP when there is no activity for a specified period of time. For instance, placing a check mark next to this option and entering “5” into the minute field will cause the Router to disconnect from the Internet after five minutes of no Internet activity. This option should be used if you pay for your Internet service by the minute.
2827 Alternate Setup Method 2827 Alternate Setup Method Setting your ISP Connection Type to PPTP (European Countries Only) This type of connection is most common in European countries. Some ISPs require a connection using PPTP protocol. This sets up a direct connection to the ISP’s system. Type in the information provided by your ISP in the space provided. When you have finished, click “Apply Changes” (9). After you apply the changes, the “Internet Status” indicator will read “connection OK” if your Router is set up properly. (1) PPTP Account Provided by your ISP. Enter your PPTP account name here. (2) PPTP Password Type in your password and retype it into the “Retype Password” box to confirm it. (3) Host Name Provided by your ISP. Enter your host name here. (4) Service IP Address Provided by your ISP. Enter your service IP address here. (9) (1) (2) (3) (4) (5) (6) (7) (8)