Antennacraft Antenna UAM9000 manual

							
 How you use this mount depends on what installation 
location you choose.
1.  Choose a safe location away from unexposed objects 
such as electric wires or pipes.
2.  Attach the base to the roof,  sidewall,  rail,  or attic rafter 
or floor using the anchor screws (see Figure 1).
 Note: You can also attach the mount base to a tower or 
an existing mast. Attach the supplied mast clamps to the 
tower structure or existing mast by assembling the U-bolts 
and lock nuts around part of the tower structure or the 
existing mast, through the mast clamps and secure with 
lock nuts. 
3.  Insert the mast into the base. Then insert the pivot bolt 
through the base and mast,  and attach a nut to the pivot 
bolt (see Figure 2).
4.  Insert the two small movement bolts into the mast, out 
through the curved opening on the base.  Attach a nut to 
each bolt and tighten to lock the mast in place (see Figure 
3).
5.  After installing your antenna on the mast you can route 
the antenna’s coaxial cable down through the mast (see 
Figure 4).
Figure 1
Figure 2
Figure 3
Figure 4
Coaxial cable 
can be routed down 
through the mast
Universal 
Antenna Mount 
Model UAM9000
Adjustable Bracket 
20½ Height
1¼ Diameter
Mount antenna to
Roof, Wall, Rail, Tower
Includes mast clamps, U-bolts
and mounting hardware
®
UAM9000     1500294
1 Pivot bolt2 Mast clamps2 U-bolts8 Lock nuts 
Included:1 Mounting mast1 Swivel base4 Anchor screws2 Movement bolts
Movement 
Bolts
Pivot Bolt
Lock Nut
Lock Nut
Lock Nut
Anchor 
Screws