American Audio CDMp3 PLAYER Radius 3000 User Manual

4 (Mode 4) - The Wheel flashes to the beat of the music. Wheel stays lit when scratching
5 (Mode 5) - Wheel is always on. Dimmable from 100-0
6 (Mode 6) - Flashes at a set speed 
7 (Mode 7) - Cue indicator with a strobe effect.
8 (Mode *) - The wheel will light when the touch sensor on the jog wheel is touched in Scratch or   
    Scratch Cue mode.
10. Bpm BUTTON - Press this button to switch between manual BPM and Auto BPM.
11. TAp BUTTON - This button is used for manual BPM. When in manual BPM mode,...

 gENERAL  fUNCTIONS  AND CONTROLS (Cont.)
©American Audio®   -   www.AmericanAudio.us   -   Radius 3000™ Instruction Manual Page 12
16.  SEARCH BUTTONS - 
        This search button allows you to quickly scan backwards through a track. 
       This search button allows you to quickly scan forwards through a track. 
17.  f AST TRACk BUTTONS -         
        This button is used to select a track. Tapping this button will for ward skip to the next track, 
holding down this button will rapidly forward...

 fect tweaks the original sound to add different tonal definition. The effect is almost the same as     
 the PHASE effect.
 ECHO EffECT - This button is used to activate and deactivate the Echo effect. The Echo effect   
 adds an echo to your output signal. See built in effects on page 32.
 TRANS EffECT - This button is used to activate and deactivate the Trans effect. The Trans 
 effect simulates a real-time mixer transformer effect. See built in effects on page 33. 
 SkID BUTTON - This button is used...

 gENERAL  fUNCTIONS  AND CONTROLS (Cont.)
©American Audio®   -   www.AmericanAudio.us   -   Radius 3000™ Instruction Manual Page 14
B. REAR  pANEL (fIgURE 3)
35. pOWER CONNECTOR - This connection is used to connect your main power. Be sure that your 
local power matches the unit’s required power. 
36.  pOWER BUTTON - This button is used to turn your unit’s power on and off.
37. RELAY  JACk - With this jack you can connect two players and relay (flip flop) play. You can also 
connect your unit to a...

©American Audio®   -   www.AmericanAudio.us   -   Radius 3000™ Instruction Manual Page 15
 gENERAL  fUNCTIONS  AND CONTROLS (Cont.)
C. VfD DISpLAY  pANEL (fIgURE 4)
42.  pLAY INDICATOR - The play indicator will glow when the unit is in play mode.
43. pAUSE INDICATOR - The pause indicator will glow when the unit is in pause mode.
44.  CUE INDICATOR - This indicator will glow when the unit is in CUE mode and will flash every time 
a new CUE POINT is set.
45. TOUCH INDICATOR -  This appears when anything...

will display either the elapse, total, or remaining time of a track or the entire disc. The display time will 
depend  on  the  selected  time  function.  The  selected  time  function  will  be  displayed  above  the  TIME 
METER as either total remaining, remaining track time, or  elapSed track name.
55. TOTAL/REmAIN/ELApSED  INDICATOR -  When TOTAL REMAIN is indicated in the Vfd diSplay 
(3) the  time  meter  will  show  the  total  disc  remaining  time. When REMAIN is  indicated  in  the Vfd...

INTERNAL mENU
©American Audio®   -   www.AmericanAudio.us   -   Radius 3000™ Instruction Manual Page 17
Press and hold the folder knoB (20) for at least 2 sec. to enter the internal menu, and turn the folder 
knoB (20) to search through the different menus. Turn either the ratio (25) or time (31)  knoBS to change 
the submenus; press the folder knoB (20) to save your settings and exit the menu.
1. JOg mODE - Select JOG LED mode (mode range is 1~8)
2. pLAYLIST - Normal/Title/Artist/Album/Genre (for USB...

 BASIC OpERATIONS
Figure 6: tapping the reverse 
track  button  or  turning  the 
track knob counter clockwise  
will jump back to the previous 
track.
Figure  7: tapping  the  forward 
track  button  or turning  the 
track knob clockwise  will skip 
forward to the next track.
1.   LOADINg/EJECTINg AN SD CARD, USB DEVICE,  OR CD
The Radius 3000™ can read SDHC (High Capacity) Cards up to 32GB. The file format is Mp3 only. When 
loading  an  SD  Card  into  the  player  load  with  the  SD  Card  label...

4. STARTINg  pLAYBACk - Figure 8
Load a audio device as described on page 18 (loading/ejecting Sd  card, 
uSB,  or cd).    Pressing  the play/pauSe  Button  (13)  will  immediately  start 
playback.  The play  (42) indicator  will  glow  as  soon  as  playback  begins.  The 
point  at  which  playback  starts  (cue  point)  will  automatically  be  stored  in  the 
memory as the cue point. The unit will return to this cue point (the point at which 
playback started) when the cue Button (14) is pressed....

 BASIC OpERATIONS (CONT.)
1) You may press the in Button (15) on the fly (while a track is playing). This
 will set a CUE Point without music interruption. Pressing the cue Button
 (14) will now return you to the same point that you pressed the in Button     
 (15). You may now store this CUE Point in any of the Bank ButtonS 1-4 
 (28).  
2) You  may  also  use  the jog  Wheel  (9) to  set  a  cue  point.  While  a  disc  is
 in  PAUSE  or  CUE  mode,  use  the jog  Wheel  (9) to  scroll  through  a...