Home > Altek > Calibrator > Altek Model 610 Digital Pressure Gauge Instruction Guide

Altek Model 610 Digital Pressure Gauge Instruction Guide

Add to Favourites
    Download as PDF

    View the Altek Model 610 Digital Pressure Gauge Instruction Guide for free. All the Altek manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview Comments
    Page 1 Model 610 Digital Pressure Gauge The Altek Model 610 Digital Pressure Gauge is a precision electronic instrument designed to accurately and reliably measure and display pressure in all popular engineering units. The Model 610 was engineered for the real world. The 300 Series stainless steel body is designed to survive harsh process environments. An isolated sensor ensures • Built for harsh process environments • Selectable units: psi, KPa, Bar, mBar, mm Hg, inches Hg, mm H 2O, inches H2O, kgF/cm2 •...
    Page 2 Screw Safety Precautions DO NOT DISCARD THESE INSTRUCTIONS. THE INFORMATION PROVIDED IN THIS DOCUMENT IS ESSENTIAL TO SAFE, PROPER EQUIPMENT OPERATION AND MAINTENANCE. It is imperative that all system pressure be relieved prior to making any connections or disconnections. Failure to relieve system pressure could result in serious personal injury and/or equipment damage. Always exercise standard physical protection practices (i.e., eye protection, gloves, protective clothing, etc.) when...
    Page 3 35 Vantage Point Drive Rochester, New York 14624 (716) 349-3500 To ensure optimum gauge operation and accuracy, annual calibration is recommended. All calibration equipment should have an accuracy of ±0.06% or better. To field calibrate a Model 610: 1. Press the On/Off key to turn off the gauge. 2. Press and hold the Units key, then press the On/Off key. 3. When CAL appears on the display (indicating that the Calibration mode is enabled), release the Units key. 4.0% will appear on the display. Apply...
    Page 4 remain in use until a new one is selected, even when gauge power is turned off. Display The display indicates the pressure value, various operating legends, and error messages. In Pressure Measurement mode, the measured pressure value and the selected engineering units will be displayed. In Peak Pressure Display mode, the peak pressure value and the HIGH legend will be displayed. In Valley Pressure Display mode, the low pressure value and the LOW legend will be displayed. When in Setup mode, SETUP will...
    Start reading Altek Model 610 Digital Pressure Gauge Instruction Guide

    Related Manuals for Altek Model 610 Digital Pressure Gauge Instruction Guide

    All Altek manuals