Alpatronix Battery Case BX120 User Manual
Have a look at the manual Alpatronix Battery Case BX120 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 12 Alpatronix manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
InstallationLED indicators Installing Illustration Hole for speaker Slide nger/coin here to remove bumper LED Indicator Power Button Kickstand Micro USB Charging Port Lightning Connector Full Accessibility to Buttons & CameraChangeable Frame æ ç é è Installing: Remove the bumper and place the iPhone into the battery case\ . Install the bumper on top in the correct orientation and snap into place\ on all sides. Uninstalling: Slide your nger in the bezel on the bottom side of the\ case and gently remove the bumper by ngernail. Package ContentsBattery Pack USB power cable User Manual Audio jack cable Be cautious of excessive drops, bumps, abrasions, or other impacts to th\ is battery. Discontinue use if dents, tears, punctures, deformities, or co\ rrosion are visible. Contact Alpatronix or dispose at the nearest Hazardous Waste C\ ollection Facility. Do not disassemble this battery case or attempt to modify it in any mann\ er. Do not expose this battery case to moisture or submerge it in liquid. Ke\ ep the battery dry at all times. Do not attempt to charge battery case using any method, apparatus, or connection other than the device`s USB connector. Do not attempt to replace any part of this battery. If the battery case is intended by purchaser to be used by a minor, purc\ hasing adult agrees to provide detailed instructions and warnings to any minor \ prior to use. Failure to do so is the sole responsibility of purchaser, who agree\ s to indemnify manufacturer for any unintended use/misuse by minors. All battery cases have gone through a thorough Quality Assurance inspect\ ion. If you nd that your battery is excessively hot, emitting odors, defo\ rmed, abraded, cut, or is behaving abnormally, immediately stop use and contac\ t Alpatronix at [email protected] or by phone at (888) 407 - 7515. For extended storage, rst charge your battery case for one hour. Never dispose of battery case in the garbage. Disposal of batteries in t\ he garbage is unlawful under state and federal laws and regulations. Alway\ s contact the manufacturer or take used batteries to the nearest hazardous\ waste collection facility or a battery-recycling center. WarningRead all instructions and warnings prior to using this product. Alpatron\ ix is not responsible for improper use of this product. Improper use may resu\ lt in product damage, excess heat, toxic fumes, re or explosion, which \ may cause you harm. Do not store battery case in high temperature enviroments, including int\ ense sunlight and/or heat. Do not place battery case in re or other excessively hot enviroment.\ NotesWhen the battery case is turned on, you will notice the charging signal \ appear on your battery indicator. When charging is nished, the signal will\ disappear. The battery case includes a USB cable. Use the provided USB cable to cha\ rge and sync your battery case with a wall charger, or with a laptop/desktop\ . Due to Apple’s placement of the headphone jack on the iPhone, not all\ headphones will t the connector. For your convenience, an adapter h\ as been provided. Simply connect the adapter to and keep it with your favo\ rite headphones or car AUX cable so that it is always ready for your phone wh\ en you need it. Charging your Battery Case and iPhoneConnect your battery case (iPhone already installed) to the USB power \ cable. Connect the USB power cable to any USB power source such as computer to \ start charging. Charge until the LED indicators read full. Charging your iPhone with Battery CasePress the power button (about 3s) to charge your iPhone in condition o\ f no external USB power sources Press again the power button (about 3s) to turn off the battery case w\ hen iPhone is fully charged, which can signicantly save the capacity of \ built-in battery so as to charge the iPhone next time. Charge Product specications ITEMSModel BX120 Input Voltage 5.0V 1A(Max) Output Voltage 5.0±0.25V 1A Nominal Capacity 2400mAh Cell Type Li-polymer 2400mAh Adaptable for iPhone 5 or 5S Standby Time Up to 255h Talk Time Up to 8h Audio Play Time Up to 40h Video Play Time Up to 10h Dimensions 0.6 x 2.4 x 5.4 inches Weight 2.8oz Communicate Synching with iTunes Internet Surng Time Up to 8hSPECIFICATION REMARK FeaturesColors match iPhone 5 and 5S style design. Fully charges your iPhone within 2 hours. Strong & durable material protects your iPhone from bumps & scratching. Protective IC circuitry avoids short-circuits, over-charging and malfunction even under extreme conditions. You have the option of changing frame colors to dress up your iPhone. Visit our website or contact us to learn how you can get more bumpers. Folding kickstand helps you enjoy movices, games, and facetime. 75-100%50-75% 25-50%1-25% BX120 Battery Case for iPhone 5/5S User Manual Alpatronix 1 Year Warranty To activate the 1 year warranty on your product, visit http://www.alpatronix.com and click on the warranty link to register your product by filling out a quick and easy f\ orm. Alpatronix warranty will fully cover your purchase against all defects in material and/or wo\ rkmanship for an entire year. Most return policies allow returns only for a period of 14 – 30\ days from the date of purchase, so hurry and register your product and give yourself peace \ of mind knowing Alpatronix has got you covered for a whole year. Help us in our charitable endeavors: Alpatronix donates $1 to charity for every review you leave on Amazon.com. Help us make the world a better place, AND help us and your fellow customers by giving us your valuable feedback. Thank you for being a contributing citizen of this world ! Alpatronix is a registered trademark of Saritek Technical Solutions, Inc. P.O. Box 17070, Anaheim, CA 92817, United States of America All other trademarks are property of their respective owners.