Home
>
Aleratec
>
Portable Device Management
>
Aleratec Charge and Guard Secure ChargeSync Cabinet 16 User Guide
Aleratec Charge and Guard Secure ChargeSync Cabinet 16 User Guide
Have a look at the manual Aleratec Charge and Guard Secure ChargeSync Cabinet 16 User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 61 Aleratec manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
USER GUIDE Aleratec Charge and Guard Secure Charge/Sync Cabinet 16™ Part No. 400104
www.aleratec.com Copyright/Model Identification The content of this manual is for informational purposes only and is subject to change without notice. This manual is copyrighted with all rights reserved. Under copyright laws, this manual and the software described within may not be copied, except in the normal use of the product(s) described within or to make a backup copy. Copyright© 2014 Aleratec, Inc. 9851 Owensmouth Avenue Chatsworth, CA 91311 U.S.A. www.aleratec.com Aleratec® is a registered trademark and Charge and Guard Secure Charge/Sync Cabinet 16™ is a trademark of Aleratec, Inc. Check out Aleratec Online! • google.com/+AleratecInc • YouTube.com/Aleratec • Twitter.com/Aleratec • Facebook.com/Aleratec • Blog.Aleratec.com Please record the following information to help expedite any warranty claim: Model No. _____________________Serial No. _____________________ Date Purchased ________________________________________________ Place of Purchase ______________________________________________
www.aleratec.com Radio/TV Interference Statement The equipment described in this guide emits radio frequency energy. If it is not installed in accordance with the manufacturer’s instructions, it may cause interference with radio or television reception. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency ener gy. If not installed and used in accordance with the instruction manual, this equipment may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be verified by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and the receiver. • Connect the equipment to an electrical outlet on a circuit that is different from the circuit to which the receiver is connected. • Consult your dealer or an experienced radio/TV technician for help. This equipment has been certified to comply with the limits for a Class B computing device, pursuant to FCC Rules. In order to maintain compliance with FCC regulations, shielded cables must be used with this equipment. Operation with non-approved equipment or unshielded cables is likely to result in interference to radio and TV reception. The user is cautioned that changes and/or modifications made to this equipment, without the approval of manufacturer, could void the warranty and the user’s authority to operate this equipment. WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to authorized personnel only.
www.aleratec.com Table of Contents Introduction .......................................................................................1 Product Features .....................................................................................1 Included Items ........................................................................................1 Key Items on the Charge and Guard Secure ...........................................2 Precautions .......................................................................................5 Installation ..............................................................................................5 Transportation .........................................................................................5 Warning ...................................................................................................5 Setup ..................................................................................................6 Labeling Your Cables ..............................................................................6 Installing Your Cables .............................................................................6 Installing Divider Walls ........................................................................10 Powering the Cabinet ............................................................................11 Charging or Syncing Your Devices.......................................................12 Securing Your Cabinet ..........................................................................14 iOS Device and iTunes Configuration Tips ..................................15 Specifications .................................................................................21 Technical Support ..........................................................................22 Service and Support.......................................................................23
www.aleratec.com1 Introduction Thank you for purchasing the Aleratec Charge and Guard Secure Charge/ Sync Cabinet 16. Please read this User Guide thoroughly before using this product. Product Features • Designed specifically for tablet deployments where durability and security are critical • Active Smart-Charge technology supports up to 16 iOS, Android and most other devices simultaneously • Provides up to a full 2.4 amps per port to quickly charge all 16 devices • Sync up to 16 tablets or other USB devices simultaneously • Heavy-duty, all metal construction protects tablets while they are being charged or synced within the cabinet • Welded anchor loop lets you chain the cabinet to a secure structure so the cabinet itself can’t be removed • 13 x 10.5 x .9 inch tablet compartments accommodate both large and small tablets and protective cases • Front Status Panel shows charge or sync status on each attached tablet within the cabinet Included Items • Charge and Guard Secure Charge/Sync Cabinet 16 • US power cord • USB 2.0 A/M to B/M cable • Key for integrated locks • 17 tablet dividers • Divider stability bar • Cable management ties • 2 cable numbering label sheets • Quick Start Guide • Registration Card
www.aleratec.com2 Introduction Key Items – Charge and Guard Secure LED Charge and Sync Indicators AC Power In Power Switch USB Port Carrying Handles
www.aleratec.com3 Introduction Key Items – Charge and Guard Secure Security Features Integrated Top Cover LockIntegrated Front Door Lock Welded Anchor Loop *Padlock not included with purchase. *Padlock and chain not included with purchase.
www.aleratec.com4 Introduction LED Charge and Sync Indicators Charging - Red LEDs Syncing - Blue LEDs Note: Whether in sync mode or charge mode, individual LEDs will turn off when the cabinet detects that the attached device is fully charged and not drawing significant power.
www.aleratec.com5 Precautions Before installing your Charge and Guard Secure Charge/Sync Cabinet 16, please read the following. Installation Avoid placing the Charge and Guard Secure Charge/Sync Cabinet 16 in a location subject to: • High humidity • High temperature • Excessive dust • Mechanical vibration • Direct sunlight • Electromagnetic radiation It is very important to place the unit in a well ventilated area. This device is not meant for outdoor use. Good care will help assure maximum product life. Improper operating environment and misuse may void the warranty. Transportation Keep the original packing materials for future moving or shipping of your Charge and Guard Secure Charge/Sync Cabinet 16. Warning Do not allow children to handle or use this product without direct adult supervision.
www.aleratec.com6 Setup Labeling Your Cables Apply the numbering labels to each end of your charge and sync cables for easier identification. Charge and sync cables not included. Installing Your Cables Setting up the charge/sync cables to your Charge and Guard Secure Charge/ Sync Cabinet 16. Note: Install the cables before installing the tablet dividers. Charge/sync cables not included with purchase. 1. Unlock and open the top cover.