Home > Alarm Lock > Alarm Lock > Alarm Lock SEDTMIII Conversion Kit UPGRADE INSTALLATION SETUP INSTRUCTIONS User Manual

Alarm Lock SEDTMIII Conversion Kit UPGRADE INSTALLATION SETUP INSTRUCTIONS User Manual

Add to Favourites
    Download as PDF

    View the Alarm Lock SEDTMIII Conversion Kit UPGRADE INSTALLATION SETUP INSTRUCTIONS User Manual for free. All the Alarm Lock manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview Comments
    Page 1 SE-DTMIII Conversion Kit MICROPROCESSOR UPGRADE INSTALLATION & SETUP INSTRUCTIONS WI1428A 10/05 UPGRADING THE AL-DTM-II TO VERSION III 1. Open battery compartment and disconnect battery. 2. Remove (4) Phillips head screws from back of case. (Note: The two longer screws secure the top of the unit and the two shorter screws secure the bottom. 3. Remove rear cover. Take care not to pull on the attached battery leads or lose the four (4) plastic spacers which are located on each corner of...
    Page 2 AL-DTM OVERVIEW Data Transfer Modules allow the transfer of lock pro- grams and other data between DL-Windows software and Alarm Lock locking devices. The improved DTM-III allows for more locks to be stored per account, both within DL-Windows and within the DTM-III itself. These instructions will allow you to configure for the improved DTM-III operation. DTMs that start up with the message Alarm Lock DTM-II-III, V1.XX will operate in both the DTM-II and DTM-III modes. Units configured to...
    Page 3 DOOR SELECTION OVERVIEW Door Numbers and Lock IDs Prior to DL-Windows v3.5.3, Door Numbers were used to ensure that each physical lock was correctly matched to its corresponding data when programmed. Door Numbers were programmable via the lock key- pad via Function 59 (for locks without keypads, such as the PL3000, Door Numbers were selected either by a DL-Windows equipped PC or by the Door Select function of an AL-DTM-II. See WI1280 for more infor- mation). With DL-Windows v3.5.3 or later,...
    Page 4 ALARM LOCK LIMITED WARRANTY ALARM LOCK SECURITY SYSTEMS, INC. (ALARM LOCK) warrants its products to be free from manufacturing defects in materials and workmanship for 24 months following the date of manufacture. ALARM LOCK will, within said period, at its option, repair or replace any product failing to operate correctly without charge to the original purchaser or user. This warranty shall not apply to any equipment, or any part thereof, which has been repaired by others, improperly installed,...
    Start reading Alarm Lock SEDTMIII Conversion Kit UPGRADE INSTALLATION SETUP INSTRUCTIONS User Manual

    Related Manuals for Alarm Lock SEDTMIII Conversion Kit UPGRADE INSTALLATION SETUP INSTRUCTIONS User Manual

    All Alarm Lock manuals