Aiphone MCWSA Instructions User Manual
Have a look at the manual Aiphone MCWSA Instructions User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 161 Aiphone manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
- INSTRUCTIONS - The MCW-S/A is a stand that will allow you to locate an Aiphone monitor station on a desk or tabletop. This stand has two angle settings, enabling the user to select the optimal mounting angle for the monitor station (45° or 60°). MOUNTING: Desk Mount Stand Use with: AX, GT, JF, JK, JO, JP, and KB Systems Aiphone Communication Website: www.aiphone.com Email: [email protected] Phone: 800-692-0200 MCW-S/A Instr. 0915JD Dimensions: Faceplate: 4½” W x 6½” H Base: 4½” W x 7⅞ D Height at 45°: 5⅛” Height at 60°: 6 AX-8MV on MCW-S/A (shown at 45°) GT-1C on MCW-S/A (shown at 60°) KB-3MRD on MCW-S/A (shown at 60°) MOUNTING: 1. Attach the intercom’s mounting bracket to the MCW-S/A utilizing the appropriate set of mounting holes. (Nuts and washers are supplied with the MCW-S/A; screws are supplied with the intercom, except for JO.) 2. Set the angle of the MCW-S/A by adjusting the rear support arm for either a 45° or 60° angle. 3. Lock the rear support arm into position to prevent the MCW-S/A from collapsing. 4. Feed the wires through the back of the MCW-S/A and attach to the intercom unit. 5. Mount the station onto the mounting bracket. 60° Angle 45° Angle MCW-S/A JF-2MED on MCW-S/A (shown at 60°)Recommended mounting hole position by system: Top :Bottom: AX GT KB JF JK JO JP 0915