Aiphone AXWPA1 Instructions User Manual
Have a look at the manual Aiphone AXWPA1 Instructions User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 161 Aiphone manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
- INSTRUCTIONS - The AXW-PA1 Paging Adaptor allows paging to external speakers from a door station zone on the AX Central Exchange Unit. For each zone of paging, use one AXW-PA1 with the appropriate sized amplifier. The AXW-PA1 provides outgoing paging only. Talkback is not available. WIRING DIAGRAM: Paging Adaptor Use with: AX Series OUTPUT To Paging Speakers AXW-PA1* SPECIFICATIONS: Input: Plugs into door output of AX CEU RJ45 jack: Approx. 16 in length. If longer cable needed, use RJ45 female coupler with additional CAT-5e cable. Distance: 980 with CAT-5e from AXW-PA1 to AX CEU Output: 600 ohm, 0dB or -20dB Amplifier input: Line Level (600 ohms) Dimensions: 4-1/8H x 2-1/2W x 1-1/2D Amplifier Aiphone Communication Systems 1700 130th Ave. N.E. Bellevue, WA 98005 (425) 455-0510 FAX (425) 455-0071 TOLL FREE TECHNICAL SUPPORT: (800) 692-0200 E-MAIL: [email protected] AXW-PA1 Instr 0107JDJS 600 ohm, non-polarized AX-248C Wht Wht INPUT OUTPUT GAIN L H Set GAIN switch to match amplifiers input level. (Default in L position.) High Gain: 0dB output to 600 ohm load Low Gain: -20dB output to 600 ohm load Note: Only information pertaining to the connection and operation of t he AXW-PA1 is included here. For complete installation, wiring, and programming information regarding the AX system, please refer to the AX Inst allation Manual which is included on the CD provided with the AX CEU. *AXW-PA1 must connect to a door input (D1-D8~D24) on AX CEU. Do not connect to master inputs (M1-M4~M8). CAT-5e RJ45 connector AX-8M MASTER STATIONDOOR STATIONDOOR STATIONDOOR STATION DC 24V PROGRAMMING: 1. Follow standard AX programming procedures as described in the AX Installation & Operation manual (included on CD with the AX CEU). 2. When configuring door stations, be sure to set the station number corresponding to the AXW-PA1 to “Audio” in the AX setup utility. OPERATION: 1. Select station button on master that corresponds to the channel number that the AXW-PA1 is plugged into. 2. Press TALK on master and make paging announcement. 3. Press OFF to conclude page.