AEG Freestanding dishwasher FSILENCEW0P User Manual
Here you can view all the pages of manual AEG Freestanding dishwasher FSILENCEW0P User Manual. The AEG manuals for Dishwasher are available online for free. You can easily download all the documents as PDF.
Page 2
CONTENTS 1.SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2.PRODUCT DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 3.CONTROL PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 4.PROGRAMMES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....
Page 3
1. SAFETY INSTRUCTIONS Before the installation and use of the ap- pliance, carefully read the supplied in- structions. The manufacturer is not re- sponsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference. 1.1 Children and vulnerable people safety WARNING! Risk of suffocation, injury or per- manent disability. • Do not let persons, children included, with reduced physical sensory, re- duced mental functions or lack of...
Page 4
WARNING! Dangerous voltage. • If the water inlet hose is damaged, im- mediately disconnect the mains plug from the mains socket. Contact the Service to replace the water inlet hose. 1.3 Use • This appliance is intended to be used in household and similar applications such as: – Staff kitchen areas in shops, offices and other working environments – Farm houses – By clients in hotels, motels and oth- er residential type environments – Bed and breakfast type environ- ments. WARNING! Risk of injury, burns,...
Page 5
2. PRODUCT DESCRIPTION 1234 569 11 78 13 10 12 1Worktop 2Top spray arm 3Upper spray arm 4Lower spray arm 5Filters 6Rating plate 7Salt container 8Air vent 9Rinse aid dispenser 10Detergent dispenser 11Cutlery basket 12Lower basket 13Upper basket 3. CONTROL PANEL 1 245 68 3 7 ENGLISH5
Page 6
1On/off button 2Program button 3Programme indicators 4Display 5Delay button 6Start button 7Indicators 8Option button IndicatorsDescription Multitab indicator. ExtraHygiene indicator. Washing phase indicator. It comes on when the washing phase operates. Rinsing phase indicator. It comes on when the rinsing phases operate. Drying phase indicator. It comes on when the drying phase op- erates. End indicator. Door indicator. It comes on when the appliance door is open or is not correctly closed. Delay...
Page 7
ProgrammeDegree of soil Type of loadProgramme phasesOptions 5)Normal soil Crockery and cut- leryPrewash Wash 50 °C Rinses DryExtraHygiene Multitab 1) The appliance senses the degree of soil and the quantity of items in the baskets. It automatically adjusts the temperature and quantity of the water, the energy consumption and the programme duration. 2) This programme has a high temperature rinsing phase for better hygiene results. During the rinsing phase, the temperature stays at 70 °C for at least 10...
Page 8
How to activate the Multitab option 1.Press Option until the Multitab indi- cator comes on. If you stop to use the combi detergent tablets, before you start to use separately detergent, rinse aid and dishwasher salt, do these steps: 1.Set the water softener to the highest level. 2.Make sure that the salt container and the rinse aid dispenser are full. 3.Start the shortest programme with a rinsing phase, without detergent and without dishes. 4.Adjust the water softener to the wa- ter hardness in your...
Page 9
Water hardnessWater softener adjustment German degrees (°dH)French degrees (°fH)mmol/lClarke degreesLevel < 4< 7< 0.7< 512) 1) Factory position. 2) Do not use salt at this level. How to adjust the level of the water softener 1.Press the on/off button to activate the appliance. Make sure that the ap- pliance is in setting mode, refer to “Setting and starting a programme”. 2.Press and hold, at the same time, De- lay and Start until the indicators of , and start to flash. 3.Press Program, • The...
Page 10
6.3 Filling the rinse aid dispenser MAX1234+- AB DC 1.Press the release button (D) to open the lid (C). 2.Fill the rinse aid dispenser (A), no more than the mark 'max'. 3.Remove the spilled rinse aid with an absorbent cloth to prevent too much foam. 4.Close the lid. Make sure that the re- lease button locks into position. You can turn the selector of the released quantity (B) between position 1 (lowest quantity) and position 4 (highest quantity). 7. DAILY USE 1.Open the water tap. 2.Press the...