AEG Freestanding dishwasher F56302W0 User Manual
Here you can view all the pages of manual AEG Freestanding dishwasher F56302W0 User Manual. The AEG manuals for Dishwasher are available online for free. You can easily download all the documents as PDF.
Page 11
How to activate ÖKO PLUSPress Option until the indicator comes on. If the option is not applicable to the programme, the related indicator does not come on or it flashes quickly for a few seconds and then goes off. The display shows the updated programme duration.8. BEFORE FIRST USE1. Make sure that the current level of the water softener agrees with the hardness of the water supply. If not, adjust the level of the water softener. 2. Fill the salt container. 3. Fill the rinse aid dispenser. 4. Open...
Page 12
8.2 How to fill the rinse aid dispenserCAUTION! Only use rinse aid specifically designed for dishwashers. 1. Press the release button ( D) to open the lid ( C). 2. Pour the rinse aid in the dispenser ( A) until the liquid reaches the fill level 'max'. 3. Remove the spilled rinse aid with an absorbent cloth to prevent too much foam. 4. Close the lid. Make sure that the release button locks into position. You can turn the selector of the released quantity ( B) between position 1 (lowest quantity)...
Page 13
1.Press the release button ( B) to open the lid ( C). 2. Put the detergent, in powder or tablets, in the compartment ( A). 3. If the programme has a prewash phase, put a small quantity of detergent in the compartment ( D). 4. Close the lid. Make sure that the release button locks into position. 9.2 Setting and starting a programmeThe Auto Off function This function decreases energy consumption by deactivating automatically the appliance when it is not operating. The function comes into operation: • 5...
Page 14
End of the programme When the programme is completed the display shows 0:00. The phase indicators are off. All buttons are inactive except for the on/off button.1. Press the on/off button or wait for the Auto Off function to automatically deactivate the appliance. If you open the door before the activation of Auto Off, the appliance is automatically deactivated. 2. Close the water tap.10. HINTS AND TIPS10.1 General The following hints will ensure optimal cleaning and drying results in daily use and...
Page 15
• Do not put in the appliance itemsmade of wood, horn, aluminium,pewter and copper. • Do not put in the appliance items that can absorb water (sponges, household cloths). • Remove larger residues of food from the dishes into the waste bin. • Make soft the remaining burned food on the items. • Put hollow items (cups, glasses and pans) with the opening down. • Make sure that glasses do not touch other glasses. • Put cutlery and small items in the cutlery basket. • Put light items in the upper basket. Make...
Page 16
2.Remove the filter ( C) out of filter ( B). 3. Remove the flat filter ( A). 4. Wash the filters. 5.Make sure that there are no residues of food or soil in or around the edge of the sump. 6. Put back in place the flat filter ( A). Make sure that it is correctly positioned under the 2 guides. 7. Reassemble the filters ( B) and ( C). 8. Put back the filter ( B) in the flat filter ( A ). Turn it clockwise until it locks. CAUTION! An incorrect position of the filters can cause bad washing results and...
Page 17
• If you regularly use short durationprogrammes, these can leave deposits of grease and limescale inside the appliance. To prevent this,we recommend to run long duration programmes at least 2 times per month.12. TROUBLESHOOTINGIf the appliance does not start or it stops during operation. Before you contact an Authorised Service Centre, check if you can solve the problem by yourself with the help of the information in the table.With some problems, the display shows an alarm code.Problem and alarm...
Page 18
12.1 The washing and drying results are not satisfactoryProblemPossible solutionThere are whitish streaks or bluish layers on glasses and dishes.• The release quantity of rinse aid is too much. Adjust the rinse aid selector to a lower position. • The quantity of detergent is too much.There are stains and dry water drops on glasses and dishes.• The released quantity of rinse aid is not sufficient. Ad- just the rinse aid selector to a higher position. • The quality of the rinse aid can be the cause.The...