Addonics Technologies SATA eSATA Mini SAS ADSAESA User Manual

							ADDONICS TECHNOLOGIES 
ADSAESA (eSATA/SATA PCI Host Controller Card) 
SPECIFICATIONS 
 
Chip Set:  Silicon Image Sil3512 int egrated host  
                   Controller 
Interface:  PCI bus compatible 
I/O Ports:  1 eSATA and 1 SATA Port 
Regulatory approvals:  FCC, CE 
 
Features: 
· 1 eSATA and 1 SATA ports 
· High data throughput, up to 150 Mbytes/sec (1.5 
Gbits/sec)  
· Work with any Serial ATA drive  
· Compatible with ATA33/66/100/133 hard drives 
and ATATPI dev ice using the optional Addonics 
IDE to Serial ATA converter  
· Built-in RAID 0 and RAID 1 support  
· Can be configured to operate as a non-RAID or 
RAID controlle r  
· eSATA port for eSATA  connections featuring 
more secure connection and reliability  
· Support large hard dri ves of 137 GB or greater  
· Silicon Image chip set SiI 3512  
· Upgradeable firmware  
· Fits standard Desktop case and low profile 
systems  
· Hot swap - device can be removed and added 
without system shut down or restart  
 
 
  
System Requirements: 
· Pentium or equivalent PC with one available 
PCI slot 
· Windows 2000/XP/2003 
 
 
 
 
 
 
 
 
 
INSTALLATIONS 
 
Software Installation: 
Note: Install the SATA Utilities from the CD that 
came with your package first before installing the Host 
Controller. 
A. From the CD start-up menu sel ect SATA 
Utilities. Sel ect Model #ADSA ESA. 
B. Unzip the file on your drive. Folder name is 
Java_RAID_GUI-113_for non-raid5 card. 
C. Install j2re-1_4_2-windows-i586-iftw 
(JRE).  
D. Next, install Java SATARaid._GUI-v113 
(SATARAID software). 
 
Hardware Installations:  
1. Power OFF PC and remove its cover. 
2. Select an empty PCI  slot and insert the 
SATA Controller. 
3. Makes sure to secure the bracket with a 
screw. 
4. Close the PC’s cover.  
 
Windows 98SE, Me, 2000, XP Driver Installations 
1. Turn computer ON. When Windows boots 
up,  “A New Hardware Found” pops on the 
screen and t he Addonics Serial ATA PCI 
Host Controller is identified. 
2. At the “Add New Hardware Wizard 
Window, click “Next” 
3. Choose “Select for the best dr iver for your 
devices”, and click “Next” 
4. Click the Browse button and locate the 
driver file you unz ip earlier. Click “Next”. 
5. If using a driver that has not been digitally 
signed by Microsoft,  you will be asked if 
you want to continue the instal lation. Click 
Continue. 
6. When the new hardware wizard has finish 
installing the Serial ATA card. Click 
“Finish” to complete the installations. 
 
Confirming Serial ATA Driver Installation 
1. Right click the  My Computer icon and select 
properties. 
2. Click Device Manager in the Menu Tree. 
3. Click the “+” s ign in front of SCSI 
controllers. Silicon Imag e SATA c ontroller 
should appear. 
 
TECHNICAL SUPPORT 
 
Addonics Technologies 
2466 Kruse Drive  Phone: 408 433-3899 
San Jose CA 95131  Fax: 408 433-3898 
Email: [email protected] 
Internet: http://www.addonics.com 
 
Technical Support (8:30 am to 5:30 pm PST) 
Phone: 408 433-3855 
Email: [email protected]