Addonics Technologies PCMCIA ExpressCard DigiAdapters adexc34cb User Manual

							 
ADDONICS TECHNOLOGIES 
Model: ADEXC34CB 
 
Installation Guide 
 
Front View 
 
 
 
  
 
 
 
 
Power LED:  The power LED lights up when the adapter is 
plug to an Express Card 34 slot with or 
without a Cardbus device connected to it. 
 
1. Insert the Cardbus device to the Cardbus slot on the 
adapter. 
  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
2. Slide the Express Card 34 Cardbus adapter to the 
Express Card 34 slot on the laptop. 
 
  
 
 
Note:  The Express Card 34  Cardbus adapter does not 
require a driver. It is the Cardbus device you 
connect to the adapter that require drivers 
 
3. Follow the onscreen instructions to install the drivers of 
the newly installed Cardbus device. 
 
 
Hot Swap Feature: 
If the Cardbus device supports hotswap, to enable this 
feature, you have to unplug the adapter with the Cardbus 
device still connected to the adapter. Removing just the 
Cardbus device won’t hotswap the device. 
 
 
 
P2 Installation: 
The P2 card requires a special procedure for installation. 
The video instructions on how to correctly install a P2 can be 
downloaded at the following locations: 
 
Part 1  
http://www.addonics.com/support/download/video/ADEXC34
CB-01.avi 
 
Part 2 
http://www.addonics.com/support/download/video/ADEXC34
CB-02.avi 
 
 
 
  
 
TECHNICAL SUPPORT 
 
Email:  http://www.addonics.com/sales/query/ 
Internet:  http://www.addonics.com 
 
Technical Support (8:30 am to 6:00 pm PST) 
Phone:     408 573-8580 
Email: http://www.addonics.com/support/query/ 
Express Card 34 
CardBus slot 
Power LED