Addonics Technologies PCMCIA ExpressCard DigiAdapters ad2cfexc34 User Manual

							 
ADDONICS TECHNOLOGIES 
Model: AD2CFEXC34 
 
Installation Guide 
 
 
        
 
 
Recommendations on using the AD2CFEXC34 
 
Install the JMB36X RAID Configurer in Windows to create raid 
volumes. The JMB36X RAID Configurer will not run when no 
devices are attached to the controller. 
 
Supports the following configuration settings  
 RAID 1 (Mirrored)  
 BigDrive (JBOD)  
 individual drive mode  
 
 
1. JMB36X RAID Configurer Installation 
 
Note:  To  create  raid  volumes  and  monitor  the  status  of  your 
raid  set,  you  need  to  install  the  JMB36X  RAID 
Configurer.  Install  the  utility  from  the  CD  that  came  with 
your package. 
 
a. Turn computer ON.  Insert Driver Disk into CDROM. 
b. The  Addonics  Technologies  Driver  Disk  window  pops 
up. 
c. Select Browse CD. Click Driver Download under 
ExpressCard / CardBus Adapters. Select  
AD2CFEXC34. Extract the files into your system. 
d. Install  JMB36X  RAID  Configurer  by  clicking  the 
Setup.exe.  Follow the instructions. 
e. After software installation, reboot the system. 
 
2. Insert the CF cards into the CF card slots of the 
AD2CFEXC34. 
 
3. In Windows, to open the JMB36X RAID Configurer, click on 
the system tray the JMicron Icon. 
  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
4. This will open up the JMB36X RAID Configurer. 
 
 
 
 
 
       
5. Click on the icon to open the wizard for each function. 
 
 
To Verify Driver Installation 
 
1. Right click My Computer and click Manage. 
2. Select Device Manager. 
3. Look for the following: 
Windows® 2000/XP/2003:  
Double click SCSI and RAID Controller: 
-JMicron JMB36X Controller should be displayed 
Windows® Vista: Double click Storage controllers: 
-JMicron JMB36X Controller should be displayed 
 
 
 
 
 
 
 
 
 
 
 
 
 
TECHNICAL SUPPORT 
 
Email:  http://www.addonics.com/sales/query/ 
Internet:  http://www.addonics.com 
 
Technical Support (8:30 am to 6:00 pm PST) 
Phone:     408 453-6212 
Email: http://www.addonics.com/support/query/ 
Power & drive activity LED 
CF  slot  2  (CF2) / Slave Create RAID Create RAID from Existing Disk 
Show  Disk 
Rebuild RAID Remove RAID 
CF  slot  1  (CF1)  / Master