Home > Addonics Technologies > Flash / SSD Reader and adapter > Addonics Technologies Internal DigiDrive Flash Reader UDD2SA user guide

Addonics Technologies Internal DigiDrive Flash Reader UDD2SA user guide

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual Addonics Technologies Internal DigiDrive Flash Reader UDD2SA user guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 299 Addonics Technologies manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    View all the pages
    Page
    of 2
    Add page 1 to Favourites
    image text
    Enable zoom 
    							Technical Support
If you need any assistance to get your unit functioning properly, please have your 
product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
Email: http://www.addonics.com/support/query/
v7.1.11
www.addonics.com
T E C H N O L O G I E S
User Guide
Internal UDD II
(UDD2SA)
    Add page 2 to Favourites
    image text
    Enable zoom 
    							This device is sized to fit into any standard 3.5” drive bay.  Any flash media below is compatible to 
use with the Internal UDD II using the optional Addonics CF DigiAdapter and 4-in-1 DigiAdapter or 
equivalent third party adapter.
Note:   The Internal UDD II is not compatible with Wireless Broadband card, SRAM\
 card and   
  Linear Memory card.
MDCF-ICF-II
MSSMSDMMC
ATA FlashPCMCIA Hard Drive
XD Memory AdapterXD
CF DigiAdapter
4-in-1 DigiAdapter
Operation of the Internal UDD II
1.  Insert the media fully into the device using PCMCIA adapters and your operating system  
  will report new hardware detected and begin to install the device. This may take a few   
  seconds before a new drive icon appears in the My Computer folder. During this    
  initialization, the LED light on the Internal UDD II toggles between red\
 and green color;  
  and will stay green once the computer recognizes the media.
2.  Once the drive icon appears, the media is now ready and can be used like\
 regular floppy  
 media.
3.  During the read / write operation, the LED light of the Internal UDD II \
will blink red.
LED
Flash Media Slot
Eject Button
Go to SATA Interface
4-Pin 
Power Connector
    All Addonics Technologies manuals Comments (0)

    Related Manuals for Addonics Technologies Internal DigiDrive Flash Reader UDD2SA user guide