Addonics Technologies Internal DigiDrive Flash Reader msuddus User Manual

							 
ADDONICS TECHNOLOGIES 
Model: MSUDDUS 
 
 
 
 
              
 
 
 
  
 
 
I. Mounting the Internal Micro SATA UDD on a 3.5” drive 
bay 
 
Using the screws provided, mount the bracket on a 3.5” drive bay 
on the system 
 
 
II. Connecting cables 
 
Note: When both SATA and USB connections are used, USB 
takes precedence over SATA. 
 
a. USB 5-pin header connection 
Connect the USB cable provided to the USB 5-pin 
header on the internal micro SATA PCB and the other 
end to the USB header on the motherboard. 
 
USB 5-pin header information 
 
 
 
 
 
 
 
 
 
 
 
b. SATA connection 
 
1. Transfer the jumper on J6 to pins 2-3. 
 
2. Connect the SATA cable provided to the SATA port  
    on the internal micro SATA PCB and the other end to 
    the SATA port on the motherboard. 
 
3. Connect the 4-pin floppy connector of the Y-power 
    cable provided to the 4-pin floppy power connector on 
    the internal micro SATA PCB. 
 
 
III. LED information 
 
When power is provided to the Internal Micro SATA UDD, the 
power LED will light up. The drive activity LED will blink when 
files are accessed and transferred on the drive. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
TECHNICAL SUPPORT 
 
Email:  http://www.addonics.com/sales/query/ 
Internet:  http://www.addonics.com 
 
Technical Support (8:30 am to 6:00 pm PST) 
Phone:     408 453-6212 
Email: http://www.addonics.com/support/query/ 
SATA port 4-pin floppy power connector 
USB 5-pin header 
Power & drive activity LED 
J6 – Power source jumper block  Place jumper on Pins 1-2 (default) when connecting via USB 5-pin header  Place jumper on Pins 2-3 when connecting via SATA