Home > Addonics Technologies > Host Controller > Addonics Technologies IDE ad2ideprj User Manual

Addonics Technologies IDE ad2ideprj User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Addonics Technologies IDE ad2ideprj User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 299 Addonics Technologies manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							 
    ADDONICS TECHNOLOGIES 
    Model: AD2IDEPRJ 
     
    Installation Guide 
     
    Angled View 
     
     Side View 
     
     Types of Bus Slots 
     
     
     
     
     
     
     
     
      
     
     
     
     
     
     
     
     
     
    Note: The AD2IDEPRJ Dual Channel IDE JBOD/RAID 
    PCI Controller connects to a PCI Bus slot. 
     
     
     
     
     
     
     
     
     
    AD2IDEPRJ Windows Driver Installation 
     
    1. Connect the IDE host controller to an available PCI slot. 
    2. Turn computer ON. When Windows boots up, the  
    “Found New Hardware Wizard” pops on the screen and 
    the Raid Controller is identified. 
    3. Place the Driver Disk on your optical drive. Select 
    automatically look for driver on the wizard. 
    4. Wait while the wizard installs the software… 
    5. After driver installation, it is recommended to shutdown 
    your system. 
    6. Connect your Ultra-IDE drives to the board. Align pin 1 
    on the drive cable to pin one on the boards primary or 
    secondary IDE connector. Pin 1 on the primary and 
    secondary IDE connector is indicated on the board. Pin 
    1 on the drive cable is indicated by a colored stripe. 
    7. Power up computer. 
     
    SilCfg Installation Utility 
     
    1. Turn computer ON.  Insert Driver Disk into CDROM. 
    2. The Addonics Technologies Driver Disk window pops 
    up. 
    3. Select Configuration Utilities. To run the utility select 
    model of the controller from the list. 
    4. After software installation, restart your system off. 
     
    The SilCfg Utility Manual can found in the Driver Disk under 
    User Guides or can be downloaded from 
    http://www.addonics.com/support/user_guides/host_co
    ntroller/Medley-Manual.pdf 
     
    Confirming Serial ATA Driver Installation 
     
    1. Right click the My Computer icon and select Properties. 
    2. Click Device Manager in the Menu Tree. 
    3. Click the “+” sign in front of SCSI and RAID Controllers. 
    You should see Silicon Image SiI 0680 Ultra-133 
    Medley ATA Raid Controller. 
     
     
     
     
     
     
     
     
     
    TECHNICAL SUPPORT 
     
    Addonics Technologies            Phone: 408 433-3899 
    2466 Kruse Drive             Fax: 408 433-3898 
    San Jose CA 95131 
    Email:  http://www.addonics.com/sales/query/ 
    Internet:  http://www.addonics.com 
     
    Technical Support (8:30 am to 6:00 pm PST) 
    Phone:    408 433-3855 
    Email: http://www.addonics.com/support/query/ 
     
    PCI 
       PCI 
    Primary IDE Channel 
    Secondary IDE Channel  
    						
    All Addonics Technologies manuals Comments (0)

    Related Manuals for Addonics Technologies IDE ad2ideprj User Manual