Addonics Technologies Gigabit Ethernet ADN1GPX User Manual

							 
 
ADDONICS TECHNOLOGIES 
ADN1GPX (Gigabit Ethernet PCI-E Controller) 
 
 
 
 
SPECIFICATIONS 
 
· Fully compliant with IEEE 802.3 (10Base-T 
Ethernet), IEEE 802.3u (100Base-TX Fast 
Ethernet), IEEE 802.3z (1000Base-T Gigabit 
Ethernet)  
· Installs into both standard hei ght or low profile 
systems.  
· Compliant with PCI Express Specification, revision 
1.0a  
· 1-lane 2.5Gbps PCI Express host interface  
· Low Profile PCI Form Factor  
· Supports Ethernet 10Mbps (half-duplex), Ethernet 
20Mbps (full-duplex), Fast Ethernet 100Mbps (half-
duplex), Fast Ethernet 200Mbps (full-duplex), 
Gigabit 1000Mbps (full-duplex) and Gigabit 
2000Mbps (full-duplex)  
· RJ-45 Port offer high speed transmi ssion over CAT 
5 UTP cable  
· LEDs indicate for various network activities  
· Auto-Negotiation with Next page capability  
· Supports pair swap/polarity/skew correction  
· Crossover Detection & Auto-Correction  
· Microsoft® NDIS5 Checksum Offload (IP, TCP, 
UDP) and largesend offload support  
· Supports Full Duplex flow control (IEEE 802.3x)  
· Supports IEEE 802.1Q VLAN tagging  
· 8K Transmit  FIFO and 64K Receive FIFO support  
· Drivers for Windows 9x, Windows 2000, Windows 
2003, Windows XP, Windows XP & Server 2003 
64-bit  
· Dimension (W x D x H) - 80 mm x 14 mm x 51 mm  
· Weight - 40 grams 
 
 
 
  
       
INSTALLATION 
 
Hardware Installations:  
1. Insert the Gigabit Ethernet PCI-Express Controller 
to the system’s PCI Express slot. 
 
Windows 2000, XP & 2003 Driver Installations 
1. The Found New Hardware Wizard pops on the 
screen. Place the Addonics driver disk into the 
CDROM drive. 
2. Found New Hardware Wizard: Can Windows 
connect to Windows Update to search for 
software? Select “No, not at this time” Click 
Next. 
3. The Generic Marvell Yukon Chipset base 
Ethernet Controller is identified.  
4. Found New Hardwar e Wizard: What do you 
want the wizard to do? Click Next to select the 
default. 
5. When the new hardware wizard has finish 
installing the Ethernet ExpressCard driver, 
click Finish to complete the inst allations. 
 
Confirming Gigabit Ethernet Driver Installation 
1. Right click the  My Computer icon and select 
properties. 
2. Click Device Manager in the Menu Tree. 
3. Click the “+”  sign in front of Network 
Adapters. Generic Marvell Yukon Chipset 
based Ethernet Controller should appear. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
TECHNICAL SUPPORT 
 
Addonics Technologies             Phone: 408 433-3899 
2466 Kruse Drive                    Fax: 408 433-3898 
San Jose CA 95131 
Email: [email protected] 
Internet: http://www.addonics.com 
 
Technical Support (8:30 am to 5:30 pm PST) 
Phone: 408 433-3855  
Email: [email protected]