Addonics Technologies DVD CD DigiCopier dgc7 User Manual

							 
ADDONICS TECHNOLOGIES 
Model: DGC7 
 
Quick Guide 
 
 
I. DigiCopier VII Overview 
  
 
There are four buttons and an LCD on the panel of DigiCopier 
VII. 
1 – LCD shows a function or a message. 
2 – it is used to scroll up function menus. 
3 – it is used to scroll down function menus. 
4 – it is used to execute a function. 
5 – it is used to cancel a function.
 
II. Connecting the power cable and turning on the 
DigiCopier VII 
 
a. Connect the power cord provided from the wall outlet to the 
back of the DigiCopier VII. 
b. A main power switch is located at the back of the tower. Turn 
the switch on. Another auxiliary power switch is located on 
the front of the tower. 
 
III. Steps for the Copying Process Note: may not able to copy-protected DVD or CD.   
Step 1 Turn on the DigiCopier VII by 
pressing the auxiliary power switch. 
 
Step 2 Insert media you wish to 
duplicate into the source tray on the 
top.  
 
 
 
 
 
 
 
 
 
 
 
Step 3 Populate the destination trays 
with blank CDs or DVD media. A 
rewritable DVD containing old data can 
also be use, but the old data will be 
automatically erased. 
 
 
Step 4 After the DVD-ROM and DVD 
writers detect DVDs, press ENT button 
to start copying. 
 
 
 
 
 
 
LCD will show the copying information as follows. 
  
When copying is in progress, MB and time will decrease while 
the percentage of completion will increase. “MB” means the size 
of data that you want to copy. 
 
When copying comes to an end, LCD will show the results as 
follows. The DVDs that were successfully copied will eject 
automatically. 
  
 
 
The complete user manual of the DVD Duplicator can found in 
the Driver Disk under User Guides or can be downloaded from 
http://www.addonics.com/support/user_guides/ 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
TECHNICAL SUPPORT 
 
Email:  http://www.addonics.com/sales/query/ 
Internet:  http://www.addonics.com 
 
Technical Support (8:30 am to 6:00 pm PST) 
Phone:     408 453-6212 
Email: http://www.addonics.com/support/query/ 
 
Auxiliary Power Switch 
Source tray 
Destination tray 1 
Destination tray 2 
Destination tray 3 
LCD Panel 
Destination tray 4 
Destination tray 5 
Destination tray 6 
Destination tray 7