Addonics Technologies DVD CD DigiCopier dgc3 User Manual

							 
ADDONICS TECHNOLOGIES 
Model: DGC3 
 
Quick Guide 
 
 
I. DigiCopier III Overview 
  
There are four buttons and an LCD on the panel of DigiCopier III. 
1 – LCD shows a function or a message. 
2 – it is used to scroll up function menus. 
3 – it is used to scroll down function menus. 
4 – it is used to execute a function. 
5 – it is used to cancel a function.
 
II. Connecting the power cable and turning on the 
DigiCopier III 
 
a. Connect the power cord provided from the wall outlet to the 
back of the DigiCopier III. 
b. A main power switch is located at the back of the tower. Turn 
the switch on. Another auxiliary power switch is located on 
the front of the tower. 
 
III. Steps for the Copying Process Note: may not able to copy-protected DVD or CD.   
Step 1 Turn on the DigiCopier III by 
pressing the auxiliary power switch. 
 
Step 2 Insert media you wish to duplicate 
into the source tray on the top.  
 
 
 
Step 3 Populate the destination trays with 
blank CDs or DVD media. A rewritable DVD 
containing old data can also be use, but the 
old data will be automatically erased. 
 
 
 
 
 
 
 
 
 
 
 
Step 4 After the DVD-ROM and DVD 
writers detect DVDs, press ENT button to 
start copying. 
 
 
 
 
 
 
 
 
 
LCD will show the copying information as follows. 
  
When copying is in progress, MB and time will decrease while 
the percentage of completion will increase. “MB” means the size 
of data that you want to copy. 
 
When copying comes to an end, LCD will show the results as 
follows. The DVDs that were successfully copied will eject 
automatically. 
  
 
 
The complete user manual of the DVD Duplicator can found in 
the Driver Disk under User Guides or can be downloaded from 
http://www.addonics.com/support/user_guides/ 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
TECHNICAL SUPPORT 
 
Email:  http://www.addonics.com/sales/query/ 
Internet:  http://www.addonics.com 
 
Technical Support (8:30 am to 6:00 pm PST) 
Phone:     408 453-6212 
Email: http://www.addonics.com/support/query/ 
Auxiliary Power Switch 
Source tray 
Destination tray 1 
Destination tray 2 
Destination tray 3 
LCD Panel