Addonics Technologies DVD CD DigiCopier dgc1 User Manual

							 
ADDONICS TECHNOLOGIES 
Model: DGC1 
 
Quick Guide 
 
 
I. DigiCopier I Overview 
  
There are four buttons and an LCD on the panel of DigiCopier I. 
1 – LCD shows a function or a message. 
2 – it is used to scroll up function menus. 
3 – it is used to scroll down function menus. 
4 – it is used to execute a function. 
5 – it is used to cancel a function.
 
II. Connecting the power cable and turning on the 
DigiCopier I 
 
a. Connect the power cord provided from the wall outlet to the 
back of the DigiCopier I 
b. The power switch is located on the front of the tower. 
 
III. Steps for the Copying Process Note: may not able to copy-protected DVD or CD.   
Step 1 Turn on the DigiCopier I by 
pressing the power switch. 
 
Step 2 Insert media you wish to 
duplicate into the source tray on the 
top. 
 
 
 
Step 3 Populate the destination trays 
with blank CDs or DVD media. A 
rewritable DVD containing old data 
can also be use, but the old data will 
be automatically erased. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Step 4 After the DVD-ROM and DVD writers detect DVDs, press 
ENT to start copying. 
 
LCD will show the copying information as follows. 
  
When copying is in progress, MB and time will decrease while 
the percentage of completion will increase. “MB” means the size 
of data that you want to copy. 
 
When copying comes to an end, LCD will show the results as 
follows. The DVDs that were successfully copied will eject 
automatically. 
  
 
 
The complete user manual of the DVD Duplicator can found in 
the Driver Disk under User Guides or can be downloaded from 
http://www.addonics.com/support/user_guides/ 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
TECHNICAL SUPPORT 
 
Email:  http://www.addonics.com/sales/query/ 
Internet:  http://www.addonics.com 
 
Technical Support (8:30 am to 6:00 pm PST) 
Phone:     408 453-6212 
Email: http://www.addonics.com/support/query/ 
Power Switch 
Source tray 
Destination tray 
LCD Panel