ADDERView RDX 5000IP Manual
Have a look at the manual ADDERView RDX 5000IP Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 78 ADDER manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 6
5
Connecting the rack drawer
All server, network and power connections are located at the rear of the\
unit.
The EXTernal link (network or remote user)
The single RJ-45 socket labelled as EXT is used to allow either global or remote
users to login and control connected servers. The EXT port provides one \
of the
following links (dependant on the model of rack drawer):
• An ethernet network link, labelled ,
or
• A remote extender link (to...](http://img.usermanuals.tech/thumb/176/2333/w64_adderview-rdx-5000ip-manual-1478559723_d-5.png "Page 6
5
Connecting the rack drawer
All server, network and power connections are located at the rear of the\
unit.
The EXTernal link (network or remote user)
The single RJ-45 socket labelled as EXT is used to allow either global or remote
users to login and control connected servers. The EXT port provides one \
of the
following links (dependant on the model of rack drawer):
• An ethernet network link, labelled ,
or
• A remote extender link (to...")
![Page 7
6
Power connection
The rack drawer is provided with a power adapter capable of supplying th\
e
display monitor, keyboard and in-built KVM module.
IMPORTANT: You must only use the manufacturer approved power adapter wit\
h
the rack drawer.
IMPORTANT: Due to the length of the power cable, if the rack drawer is
mounted high in the rack it may not be possible to place the power adapt\
er at
floor level. In this case it is important to mount it...](http://img.usermanuals.tech/thumb/176/2333/w64_adderview-rdx-5000ip-manual-1478559723_d-6.png "Page 7
6
Power connection
The rack drawer is provided with a power adapter capable of supplying th\
e
display monitor, keyboard and in-built KVM module.
IMPORTANT: You must only use the manufacturer approved power adapter wit\
h
the rack drawer.
IMPORTANT: Due to the length of the power cable, if the rack drawer is
mounted high in the rack it may not be possible to place the power adapt\
er at
floor level. In this case it is important to mount it...")
![Page 9
8
SECT 4
Operation
Opening and closing the rack drawer
The compact rack drawer is easy to open and close when required.
To open the rack drawer
1 Press the button on the carry handle at the front of the rack drawer uni\
t and
gently pull the carry handle towards you:
2 Once the drawer is fully extended, lift up the carry handle to reveal th\
e
screen and keyboard:
To close the rack drawer
1 Fold down the screen and locate the black arrow...](http://img.usermanuals.tech/thumb/176/2333/w64_adderview-rdx-5000ip-manual-1478559723_d-8.png "Page 9
8
SECT 4
Operation
Opening and closing the rack drawer
The compact rack drawer is easy to open and close when required.
To open the rack drawer
1 Press the button on the carry handle at the front of the rack drawer uni\
t and
gently pull the carry handle towards you:
2 Once the drawer is fully extended, lift up the carry handle to reveal th\
e
screen and keyboard:
To close the rack drawer
1 Fold down the screen and locate the black arrow...")
![Page 11
10
Selecting server channels
In operation, you can select server channels in two main ways, including\
:
• On screen menu, or
• Keyboard hotkeys.
For more information, please refer to the Operation section of the appro\
priate
Adder user guide as appropriate to the rack drawer model being used:
• RDxx16yy ---> use AdderView CATx 1000 user guide,
• RDxx16IPyy ---> use AdderView CATxIP 1000 user guide,
• RDxx16QIPyy ---> use AdderView...](http://img.usermanuals.tech/thumb/176/2333/w64_adderview-rdx-5000ip-manual-1478559723_d-10.png "Page 11
10
Selecting server channels
In operation, you can select server channels in two main ways, including\
:
• On screen menu, or
• Keyboard hotkeys.
For more information, please refer to the Operation section of the appro\
priate
Adder user guide as appropriate to the rack drawer model being used:
• RDxx16yy ---> use AdderView CATx 1000 user guide,
• RDxx16IPyy ---> use AdderView CATxIP 1000 user guide,
• RDxx16QIPyy ---> use AdderView...")
![Page 12
11
Further information
Troubleshooting
Interference signal appears on the screen when shutting down the
system
• In rare cases interference may appear on the screen. This may be caused by
signal rate of the video card and is considered normal. The image qualit\
y can
be improved by adjusting the phase or pixel rate.
The membrane power light is not ON
• Press the Power On / Off button on display membrane to check whether the
monitor is...](http://img.usermanuals.tech/thumb/176/2333/w64_adderview-rdx-5000ip-manual-1478559723_d-11.png "Page 12
11
Further information
Troubleshooting
Interference signal appears on the screen when shutting down the
system
• In rare cases interference may appear on the screen. This may be caused by
signal rate of the video card and is considered normal. The image qualit\
y can
be improved by adjusting the phase or pixel rate.
The membrane power light is not ON
• Press the Power On / Off button on display membrane to check whether the
monitor is...")
![Page 13
12
Safety information
• For use in dry, oil free indoor environments only.
• Unplug equipment before cleaning. Don’t use liquid or spray detergent; use
a moist cloth.
• The unit is heavy. Therefore when installing, place the rack drawer on a
sturdy, level surface to prevent it from accidentally falling and causin\
g
damage to other equipment or injury to persons nearby.
• Both the AdderView RDX Rack Drawer and its power supply generate...](http://img.usermanuals.tech/thumb/176/2333/w64_adderview-rdx-5000ip-manual-1478559723_d-12.png "Page 13
12
Safety information
• For use in dry, oil free indoor environments only.
• Unplug equipment before cleaning. Don’t use liquid or spray detergent; use
a moist cloth.
• The unit is heavy. Therefore when installing, place the rack drawer on a
sturdy, level surface to prevent it from accidentally falling and causin\
g
damage to other equipment or injury to persons nearby.
• Both the AdderView RDX Rack Drawer and its power supply generate...")
![Page 14
13
Radio frequency energy
All interface cables used with this equipment must be shielded in order \
to
maintain compliance with radio frequency energy emission regulations and\
ensure a suitably high level of immunity to electromagnetic disturbances\
.
European EMC directive 89/336/EEC
This equipment has been tested and found to comply with the limits for a\
class
A computing device in accordance with the specifications in the Europe\
an...](http://img.usermanuals.tech/thumb/176/2333/w64_adderview-rdx-5000ip-manual-1478559723_d-13.png "Page 14
13
Radio frequency energy
All interface cables used with this equipment must be shielded in order \
to
maintain compliance with radio frequency energy emission regulations and\
ensure a suitably high level of immunity to electromagnetic disturbances\
.
European EMC directive 89/336/EEC
This equipment has been tested and found to comply with the limits for a\
class
A computing device in accordance with the specifications in the Europe\
an...")
10 Selecting server channels In operation, you can select server channels in two main ways, including\ : • On screen menu, or • Keyboard hotkeys. For more information, please refer to the Operation section of the appro\ priate Adder user guide as appropriate to the rack drawer model being used: • RDxx16yy ---> use AdderView CATx 1000 user guide, • RDxx16IPyy ---> use AdderView CATxIP 1000 user guide, • RDxx16QIPyy ---> use AdderView CATxIP 5000 user guide. where: xx is either 17 or 19, denoting the LCD screen size yy is the country code, e.g. UK, US, etc.
11 Further information Troubleshooting Interference signal appears on the screen when shutting down the system • In rare cases interference may appear on the screen. This may be caused by signal rate of the video card and is considered normal. The image qualit\ y can be improved by adjusting the phase or pixel rate. The membrane power light is not ON • Press the Power On / Off button on display membrane to check whether the monitor is switched on. • Check the power cord is properly connected to the rack drawer and power outlet. Screen image is not centered or sized properly • Press the button for five seconds to automatically adjust the image. Auto adjust can also be initiated within the geometry section of the OSD\ menu. • Adjust the H-position and V-position settings via the OSD menu. SECT 5 Getting assistance If you are still experiencing problems after checking the list of soluti\ ons in the Troubleshooting section then we provide a number of other solutions: • Adder Technology website – www.adder.com Check the Support section of our website for the latest solutions and dr\ iver files. • Email – [email protected] • Fax in the UK: 01954 780081 in the US: +1 888 275 1117 • Phone in the UK: 01954 780044 in the US: +1 888 932 3337 Screen specifications The following specifications apply to both screen sizes unless indicat\ ed otherwise: Maximum resolution 1280x 1024 Brightness 300 Cd/m2 Contrast ratio 1000:1 Viewing angle 160o x 160o Display area 338 x 270mm (17” model) or 376 x 301mm (19” model)
12 Safety information • For use in dry, oil free indoor environments only. • Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth. • The unit is heavy. Therefore when installing, place the rack drawer on a sturdy, level surface to prevent it from accidentally falling and causin\ g damage to other equipment or injury to persons nearby. • Both the AdderView RDX Rack Drawer and its power supply generate heat when in operation and will become warm to the touch. Do not enclose them or place them locations where air cannot circulate to cool \ the equipment. Do not operate the equipment in ambient temperatures exceeding 35º Celcius (95º Fahrenheit). Do not place the product\ s in contact with equipment whose surface temperature exceeds 35º C (95º F). • Ensure that the power adaptor is mounted so that neither its cables nor connectors are stressed. • Observe all precautions and warnings attached to the equipment. • Warning - live parts contained within power adapter. • No user serviceable parts within power adapter - do not dismantle. • Plug the power adapter into a socket outlet close to the rack drawer. • Replace the power adapter with a manufacturer approved type only. • Do not use the power adapter if the power adapter case becomes damaged, \ cracked or broken or if you suspect that it is not operating properly. • Do not attempt to service the unit yourself. • Not suitable for use in hazardous or explosive environments or next to highly flammable materials. • If you use a power extension cable, make sure the total ampere rating of the devices plugged into the extension cable do not exceed the cable’s ampere rating. Also, make sure that the total ampere rating of all the devices \ plugged into the wall outlet does not exceed the wall outlet’s ampere rating. Warranty Adder Technology Ltd warrants that this product shall be free from defects in workmanship and materials for a period of two years from the date of ori\ ginal purchase. If the product should fail to operate correctly in normal use \ during the warranty period, Adder will replace or repair it free of charge. No liab\ ility can be accepted for damage due to misuse or circumstances outside Adder’s control. Also Adder will not be responsible for any loss, damage or injury arisin\ g directly or indirectly from the use of this product. Adder’s total liability under the terms of this warranty shall in all circumstances be limited to the replacemen\ t value of this product. If any difficulty is experienced in the installation or use of this pr\ oduct that you are unable to resolve, please contact your supplier.
13 Radio frequency energy All interface cables used with this equipment must be shielded in order \ to maintain compliance with radio frequency energy emission regulations and\ ensure a suitably high level of immunity to electromagnetic disturbances\ . European EMC directive 89/336/EEC This equipment has been tested and found to comply with the limits for a\ class A computing device in accordance with the specifications in the Europe\ an standard EN55022. These limits are designed to provide reasonable protection against harmful interference. This equipment generates, uses and can rad\ iate radio frequency energy and if not installed and used in accordance with \ the instructions may cause harmful interference to radio or television recep\ tion. However, there is no guarantee that harmful interference will not occur \ in a particular installation. If this equipment does cause interference to ra\ dio or television reception, which can be determined by turning the equipment o\ n and off, the user is encouraged to correct the interference with one or \ more of the following measures: (a) Reorient or relocate the receiving ante\ nna. (b) Increase the separation between the equipment and the receiver. (c) Co\ nnect the equipment to an outlet on a circuit different from that to which the\ receiver is connected. (d) Consult the supplier or an experienced radio/TV tech\ nician for help. FCC compliance statement (United States) This equipment generates, uses and can radiate radio frequency energy and if not installed and used properly, that is, in strict accordance wi\ th the manufacturer’s instructions, may cause interference to radio communication. It has been tested and found to comply with the limits for a class A com\ puting device in accordance with the specifications in Subpart J of part 15 o\ f FCC rules, which are designed to provide reasonable protection against such interfe\ rence when the equipment is operated in a commercial environment. Operation of\ this equipment in a residential area may cause interference, in which case th\ e user at his own expense will be required to take whatever measures may be necess\ ary to correct the interference. Changes or modifications not expressly ap\ proved by the manufacturer could void the user’s authority to operate the equipment. Canadian department of communications RFI statement This equipment does not exceed the class A limits for radio noise emissi\ ons from digital apparatus set out in the radio interference regulations of the C\ anadian Department of Communications. Le présent appareil numérique n’émet pas de bruits radioé\ lectriques dépassant les limites applicables aux appareils numériques de la classe A presc\ rites dans le règlement sur le brouillage radioélectriques publié par le m\ inistère des Communications du Canada.
14 © 2011 Adder Technology Limited All trademarks are acknowledged. Release 1.0d April 2011 Part No. MAN-RACKDRAWER-ADDER Adder Technology Limited, Technology House, Trafalgar Way, Bar Hill, Cambridge, CB23 8SQ, United Kingdom Tel: +44 (0)1954 780044 Fax: +44 (0)1954 780081 Adder Corporation, 350R Merrimac Street, Newburyport, MA 01950, United States of America Tel: +1-888-932-3337 Fax: +1-888-275-1117 www.ctxd.com Documentation by: Adder Asia Pacific 6 New Industrial Road, Hoe Huat Industrial Building #07-01, Singapore 536199 Tel: +65 6288 5767 Fax: +65 6284 1150