Accell MHL to HDMI Adapter with RCP J135C003B Manual

							 
   
MHL to HDMI Adapter  
Instructions for use  
 
1. With the power to the TV off, connect an HDMI ca ble from the HDMI port on 
the MHL adapter to your HDMI TV or other HDMI devic e. 
Note: Supplying power to the connected MHL source d evice will allow the source 
device to remain charged while being used. Use the  charger supplied or 
approved by the manufacturer of your mobile device.  
2. If power to the MHL device is desired, connect t he USB Micro-B cable from 
your mobile devices supplied travel charger to the  CHARGE port on the side of 
the adapter. See note below.  
3. Plug your mobile device’s supplied travel charge r into a power source. 
4. With the MHL enabled device turned off, connect  the MHL adapter’s USB 
Micro-B connector to the MHL enabled source device.  
5. Turn on the TV and MHL source device. 
6. Configure the TV to the HDMI input being used. R efer to the TV’s instructions 
for more information.  
7. If needed, configure your MHL enabled device to  output audio and/or video 
through the MHL connector. Refer to the source devi ce’s instruction manual for 
more information on enabling the MHL output. 
Note: The use of a power adapter is dependent upon  the source devices ability                                           
to supply power from its USB Micro-B port.